Jump to content
SAU Community

Cooling-pro - Type 2 Tube-n-fin Intercooler Kit

Brycey
 Share

Recommended Posts

Brycey Proficient

Brycey

Posted
Posted (edited)

Item: Cooling-Pro Type 2 tube-n-fin Intercooler kit

Item Condition: New/Unused

Reason for Selling: No longer needed

Price and Payment Conditions: $340neg + Postage

Extra Info: RRP $499 (which is the price the kit was purchased at from just-jap).

complete kit with all piping, silicone joins and clamps. Designed for R34/C34 but will also fit R33 I believe. Below is a picture of how this kit would look installed (this is not my car or my kit as it hasn’t been used before, this is just a very very similar/if not the same style of kit).

This is a higher grade intercooler with a tube and fin setup (as opposed to bar and plate). The kit sells how it came but with a few additional mounting brackets as I’m not sure which ones it came with.

Located in the Newcastle area, will courier at buyers cost and organization.

06-06-04_15-22.jpg

Pictures:

The mounting brackets and 5th silicone join aren't pictured but I can get additional pictures if needed.

img5499tm4.jpg

img5505pa8.jpg

img5507jp0.jpg

PM me or email at [email protected]

edit - also fits R32 :(

:teehee::)

Edited by Brycey
EJD001 Mentor

EJD001

Posted
Posted (edited)

Will get this if its still available in the next few weeks.. just short of money for the next two weeks or so..

im on the coast, and have seen ya car when i came up and sat on the lap!! ya car is hott dude!

If u can wait can put down a small payment to hold it.. PM me if u are interested!

Edited by EJD001

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...