Jump to content
SAU Community

Recommended Posts

Make:R33 series 1.5 m-spec

Model:1995

Milage:90,000

Transmission:5speed

Colour:Purple 3layer pearl

Location:syd 0 nsw

Complied?yes

RWC supplied?

Currently registered?yes 2months new rego

Price:$14900 ono or swap with 180sx,s14a,gtir etc

Contact:0403 710 821

Comments / Modifications:

M-spec gts-t

Tr front bar

xplode side skirts

400r rear bar

custom purple 3 layer paint

lip wing

autometer boost guage

greddy turbo timer

jvc head deck

7inch dvd screen

sony xplod amp

rockford 12inch sub

sony tweeters

steering wheel and gear knob

genuine hybrid front mount

blitz bov

hks pod filter

head sheild for air filter

3inch turbo back exhuast into 5inch canon

turbosmart dual stage boost controller in cabin switch 9psi and 14psi

tein adjustable suspension

chip ecu

car is engineered all over.

nsw rego 2months

90,000ks

bad points-

-sunroof dosent seem to work, (fuse or switch) not sure

-standard turbo is starting to leak, blowing a bit of smoke, due to oil going through the

exhuast.

apart from that car is very immaculate and clean.

Images:

please hit the link for photos-

http://www.boostcruising.com/forums/index....howtopic=273859

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...