Jump to content
SAU Community

Recommended Posts

THX paulr33 give me that information.. :)

REF TO THIS http://paulr33.skylinesaustralia.com/docs/...erfc-faq.htm#70

AS TOPIC WHICH PFC CONTROLER TO SUIT RB20DET??

FCC NT First generation to suit Nissan ?

FCC FN Second generation to suit Nissan ?

DOES ANYONE USING AP ENGINEEING PWC FOR THEIR RB20DET... ?

CAN SOMEONE TELL ME WHICH CONTROL TO SUIT??

Link to comment
https://www.sau.com.au/forums/topic/209557-power-fc-controler-for-rb20det-a31/
Share on other sites

Back of the hand comander: FCC2 NT010-00443

I won't be starting the car for a day or so, when I do I will check what version it is for you

Is the above version hand commander right for the PFC I have Paul?

It works fine with no issues etc - its just that you said it should be N001

I know the FCC2 refers to a Version 2 - but whats the go with the NT010-00443

yeah FCC NT or FCC NT2 is the older style hand controller

this was for nissan generic before they started shipping them as batch FC + HC

but you can't buy FCC NT new anymore as they don't make it

they make

FCC N001

or

FCC X001

N001 is the older style nissan hand controller - this should work - their serial is usually like RB20 or RB25 or RB26 (note its the actual engine code)

X001 is the newer style hand controller - for users who have the bundle style PFC - their serial is usually like ECR33 (note it changed to the actual car code) or GTR33-L (BNCR33 l-jetro)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...