Jump to content
SAU Community

Recommended Posts

Make: Nissan Skyline R33

Model: R33 GT-R

Milage: A little over 67,000

Transmission: Manual

Colour: Maroon

Location:Melbourne

Complied?Yes

RWC supplied?No (Cant needs discs)

Currently registered?Yes, till 29th March 2009

Price:$30,000. ono

Contact:Steve on 0409426203

Comments / Modifications: This car is a good, clean stock gtr. The engine was rebuilt around 8000k's ago with foged JE pistons, let me know if you want any details of the rebuild. Needs a new clutch but comes with a Nismo GMAX twin plate thats only done 4000k. Also comes with everything needed to do this clutch install including a Nismo flywheel. Also needs new disks and pads but it comes with a full set of genuine Brembo pads. Has a K&N panel air filter but comes with a HKS pod air filter kit that is close to brand new. The car also has a Fujitsubo Giken cat back exhaust, This is a full titanium exhaust that would cost around $4000 to replace. It has Ohlins coilover suspension all round with adjustable damper. It has an omnitronic alarm that values at $1500 that has remote start and an in car camera that displays photos on the pager alarm handset. It has a 400r front lip and also has genuine R33 GT-R floormats. Stock enterior apart from a near top of the range Pioneer cd/mp3 player with bluetooth. Speaker setup is Rockford fosgate 6" all round with a 600watt pioneer amplifier. Its got a blitz turbo timer and 2x Blitz blowoff valves. Inspections welcomed, let me know if you want photo's. I will have to get them from my computer at home but I have heaps, incuding pics of the rebuild.

Its a fairly stock GT-R with low K's and Maroon is a very rair colour. I have seen more Midnight Purple R33 GT-R's than Maroon. $30,000 ono. Cant go wrong. If you want to swap, let me know the details of what your swapping. I need this car gone because i dont have the budget anymore.

Images:

Edited by steven22
Link to comment
https://www.sau.com.au/forums/topic/212881-r33-gtr-for-sale/
Share on other sites

  • 3 weeks later...

Who did the rebuild??

You looking to add money to a swap or get money??

I think unfortunately $25k is more realistic as there are quite a few good ones for $25k, surprising I know but the market is crazy fr sellers, a dream for me:)

Cheers

Nice stock R33 gtr with 53000klms just went on here for 21k

Any interest in swapping for a mint S2 GTST with 80000klms & cash?

Yeah, I'm looking for cash as the big thing though, so I probably wouldn't do your gtst justice. I'm only looking to spend about $12,000 on my new car, so if the gtst is mint it probably will go for more.

Hey, I will swap for a black or silver series 2 R33 gts-t. Dont care if its stock but I want cash on top, or I can take things out of what I am offering, (like the clutch or pods for example) to bring my price down. I'm seriously up for negotiating.

Just something nice & clean guys. Sunroof is a plus.

I would also swap for a: -pulsar gtir

-32 gts-t

Edited by steven22
Hey, I will swap for a black or silver series 2 R33 gts-t. Dont care if its stock but I want cash on top, or I can take things out of what I am offering, (like the clutch or pods for example) to bring my price down. I'm seriously up for negotiating.

Just something nice & clean guys. Sunroof is a plus.

I would also swap for a: -pulsar gtir

-32 gts-t

hey man is it still up 4 sale??

how about a 33 4dr, turbo manuak + cash ur way?

cheerd bevan?

post-44556-1209298498_thumb.jpg

When I bought it there was a piggy back chip installed, not to my knowledge. So with its fuel map, my lack of experience with performance cars and the car being fuelled with low ron fuels. Piston 6 was slowly eaten away due to the car running way to lean. When I took it to AVO turbo world after the rebuild, the problem was identified pretty much straight away. I was pissed off, but better to know what happened than to think 'oh well rb26's just blow up sometimes'.

The only way I found out was, one day it had a pretty bad miss so I took it to a mate who was a mechanic, they did a compression test and about 3 months and about 7k later well, you get the point.

This a genuine sale, never been crashed. I need money to pay off a loan. The engine is fine......now. AVO dissabled the chip, checked everything was safe and running ok.

Just to let you know/remind you.

I would swap for a large number of cars, just on the cheaper side cos I obviously need some cash. 180sx's, 200sx's, r32's, r33's, wrx's, evo's. That sort of thing.

Edited by steven22
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...