Jump to content
SAU Community

R33 Rotors, Boost Controller, 12mm Bolt On Wheel Spacers, Seats, Z32 Afm Plugs, Actuator

nigelswazi
 Share

Recommended Posts

nigelswazi Mentor

nigelswazi

Posted
Posted (edited)

Selling the following items to clear out garage:

----------------------------------------------------------------------------------------------------------

item: A complete set of Bilstein Shocks + Eibach lowered/stiffer springs to suit R33 GTS-t Series 1 or 2. Used for the last 8 months with just normal street/hills use for which they are absolutely perfect. Excellent spring rate which gives fantastic handling and a significant reduction in body roll whilst being perfectly comfortable for street use.

Price: $700 Now SOLD

Pics soon!

----------------------------------------------------------------------------------------------------------

Item: Pair of R33 Front Rotors in excellent condition heaps of meat left as shown in pic with only a little even wear since new. Measured thickness which is at 29.1 and 29.2mm so not even half worn. Fits R33 Caliper equiped vehicles

Price: $80 pair Now $60 pair

frontrotorsvc6.th.jpg

----------------------------------------------------------------------------------------------------------

Item: Pair of Jap 12mm thick bolt on wheel spacers complete with studs and bolts, that bolt onto 4x114.3 hubs and allow you to fit 4x100 wheels. Was used on my S13 to space my wheels 12mm as I had 4stud wheels that had both 4x114.3 & 4x100 stud patterns so was the perfect solution. Can also be used as a 12mm spacer for either stud pattern if you had longer wheel studs.

Price: $100 $80 pair

wheelspacerscloseupar5.th.jpg

wheelspacersgr1.th.jpg

----------------------------------------------------------------------------------------------------------

Boost Controller - electronically activated boost controller valve allowing you to run stock boost and then at the flick of a switch run the boost level you set on the valve. Needs a switch as the one I used for this is still mounted on my console and too difficult too remove again :thumbsup:

Price: $60 $35

boostcontrolleryo4.th.jpg

----------------------------------------------------------------------------------------------------------

Z32 AFM Plugs + ~30cm of loom ready to splice or wire into your loom to run Z32 AFM. Come complete with instructions on wiring into SR, CA & RB Powered Vehicles

Price - $30 Delivered or $20 pickup

----------------------------------------------------------------------------------------------------------

Pair of R33 Front Seats in excellent condition. The drivers seat has a small tear in bolster nothing major. This is the comfy plush velour type model with the adjustable side bolster wings for more support through corners etc.

Price - $150

----------------------------------------------------------------------------------------------------------

R33 Internal Heater Fan assembly includes fan itself along with the air intake & recirculation electrics etc in excellent condition.All is as shown in pic perfect if your fans packed it in so it no longer blows air in your car. In excellent condition little dusty just give it a quick wipe before fitting.

Price - $30

internalheaterfansepex3.th.jpg

internalheaterfansl1.th.jpg

----------------------------------------------------------------------------------------------------------

R33 Stock Actuator in excellent condition to suit R32/R33 turbos

Price - $25 $20

acutatorjq2.th.jpg

----------------------------------------------------------------------------------------------------------

Aftermarket Swaybars

S14 Front 27mm hollow swaybar, same thickness as whiteline HD but a hell of a lot lighter, painted black complete with D bushes, saddles and end links. Hollow bars are generally how the japs make their aftermarket swaybars as they perform the same as solid but save weight which also increases handling. Unsure if it fits S13/S15 Price - $100ono

Stock Sway Bars - $25 each

R33 Front Stock complete with D bushes and saddles but no endlinks

R33 Rear Stock complete with D bushes but no saddles or endlinks

S13 Rear Stock complete with D bushes but no saddles or endlinks

---------------------------------------------------------------------------------------------------------

Freebies

Pair R33 Front Castor Rod Chassis Mounts

Pair S13 Rear 4 Stud Hubs

Location:

Adelaide but will post some items at your expense

Contact:

SMS 0404998591 or PM prefer SMS

Edited by nigelswazi
nigelswazi Mentor

nigelswazi

Posted
  • Author
Posted (edited)
Do you also have a pic of how low the car sat with the Bilstien / eibachs?

I have one on my computer at work will post one when I get there.

CAn you give a vernier measurement on the thickness of the rotors?

As soon as I find my vernier but they are a old school set not digital will see if I can borrow or take to ABS or somewhere to get measured. Heaps of meat tho

Edited by nigelswazi
nigelswazi Mentor

nigelswazi

Posted
  • Author
Posted (edited)
got a pic of the front seats?

Cheers

Jo

Hi Jo will get a pic for you asap

Is the suspension height or damper adjustable?

Suspension is not height adjustable but you can always get the shocks modded to runs circlip height adjustability if required. Shocks don't really need adjustment as they give a excellent ride quality from both handling and comfort perspective these are basically the same as the SK group buy setup for a fraction of cost.

--------------------------------------------------------------------------------------------------------------------------------------------------

Rotors are 29.1 and 29.2mm thick using my vernier calipers so they are not even half worn yet. Minimum legal thickness is 28mm

FINAL PRICE DROP CRAZY CHEAP PRICES

Edited by nigelswazi
nigelswazi Mentor

nigelswazi

Posted
  • Author
Posted (edited)

Post Updated

R33 Rotors Backup for Sale

Coilpack Cover SOLD

Pioneer Stereo Package Now SOLD

Special Weekend Prices!

Edited by nigelswazi
mid life crisis Veteran

mid life crisis

Posted
Posted

do you have the little black box actuactor with the white arm on from the heater assembly it opens the bottom flap for the heaters ?

cheers dean

nigelswazi Mentor

nigelswazi

Posted
  • Author
Posted
do you have the little black box actuactor with the white arm on from the heater assembly it opens the bottom flap for the heaters ?

cheers dean

Certainly does has the box complete with the white arm still assembled

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • GTSBoy
      Wheel Sizes & Offsets For Skylines

      By GTSBoy · Posted

      There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • GTSBoy
      Rear Sway Bar Busshings - Holden Astra TS (2002)

      By GTSBoy · Posted

      I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • GTSBoy
      R34 25GT Engine Light 21

      By GTSBoy · Posted

      Yeah - I mean, go the other way. Smaller range. Not larger.
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To re-cap, I bought: https://www.alibaba.com/product-detail/Lsailt-8G-Infiniti-Q50-Q60-2014_1601171829627.html?spm=a2756.trade-list-buyer.0.0.2cd476e9FTIlKE As you can see, if I bought 20 it was $653, but I bought 1 so it was $1,170. I was very tempted to buy 2 and resell 1 at 25% cheaper. @MBS206, I am not sure if they do a Kluger one, here is their list but it might be there under a global model name: http://www.lsailt.com/product/android-interface?page=1 Keep in mind these full android replacements have basically all the bits a phone does (cpu, ram, storage, wifi, bluetooth, usb interfaces) other than a screen (it uses a host), thus the $800+ cost. Android Auto screen mirroring is MUCH cheaper as it's just a cut down shell, input mirroring and output mirroring BTW I also need that "screen off" feature, it is much harder to see wildlife even if a dash is reasonably dark. Both the Fuga and V37 have display off buttons for night use, they just come back on for a second or 3 if you interact with it, eg skip a song.
×
×
  • Create New...