Jump to content
SAU Community

Recommended Posts

Gary I don't need all theese super functions! I will never use them.

I will not need something more than Nomura haha!! Or R348 Blitz!

The only functions that I need is a launch control and I will have it.

Two maps on the standar ecu and when I will have the handbrake up I will have launch map.. with rev limit 5-6 rpm and with retard ignition and rich afr.. no too much aggresive because I don't need to destroy my expensive T04Z!

So you have built a 750 hp RB26 and you aren't going to use it properly. Seems like a waste of time and money to me.

You had better take a proper look at Nomura and Blitz R348, they make up for the standard ECU deficiencies with add on electronics. Much smarter to do it all in the one unit.

Cheers

Gary

That's anti lag, a complete launch control system combines anti lag with traction control. Anti lag spools up the turbo, builds boost with no load on the engine. If you launch with full anti lag on you will be sacrificing horsepower (too much retarded ignition and way too rich A/F ratios).

I was explaining just this to the owners of two BIG GTR's over dinner in Canberra on friday night. They couldn't work out why when they used "anti-lag" to launch, the cars bogged down off the line and went nowhere. I had much better launch times with an ECU that cost a 10th of the price (mine is std Power FC and they both use MoTeC M800's) only using a fuel cut rev limit with zero boost free revving the engine.

Edited by DiRTgarage

DiRTgarage I think about this and yes I will have a simple rev limit.. better safe than sorry (for my turbo life) but also my car is RWD with 750hp with drag radials (hoosier 275-60-15).. if I launch with boost (rich with retard advance) I will spin too much!! So for start I will use a simple rev limiter to launch.. or just nothing for the first times! Also I have no idea with what rpm to launch!

Sydneykid my car with stock ecu will have the same horsepower with a standalone?

As safe as with standalone?

Unbelievable chepaer that with standalone?

I don't need the race functions of one standalone.. only launch control that stock ecu can have it too!

It is a car for street use and for drag races!

So why to do it?!?

I prefer to spend theese money for a gear set!! Hehe!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
    • Thanks guys - I have been overseas for a hectic many weeks , so haven't had time to chase any of these up.  Some of the suggestions are for 4.1 ratio, which I already have, and a 3.5 at Lonsdale, which is also too tall.  Really looking for 3.9 or even a 3.7 LSD, either with M12 bolts. Will look some more.  
    • Yeah sounds like the swirl pot isn't being fed from the return line, would be made even worse by the high flow pump. 
    • This is the R32 one and the inside of the tank should look like this. which has an internal swirl pot, that the return line must empty into. (Interestingly, because the GTR tank is plastic it misses out on the swirl pot.) That is a potential cause for an aftermarket pump hanger to mess things up. Maybe the return is cut short and squirting over the side.
×
×
  • Create New...