Jump to content
SAU Community

S13, S14, S15, R32 Gtst & Gtr, R33 Gtst, Ca18det, Sr20det Red Top And Vvti, Rb20et, Rb25det, Rb26dett


Recommended Posts

Okay ppl I have a heaps of parts to get rid of

1) SR20DET Red top Engine, It has inlet manifold, alternator, power steering pump, complete head, block, crank rods and pistions, sump. There is no turbo, exhuast manifold, throtle postions sensor, loom, computer, distributor or coil packs. This engine had number 2 conrod cap come loose and jam the engine. There is no damage to the crank, block or head but the cams are worn.

Perfect for a rebuild

$300 ono

2) SR20DET Starter motors x2 $100

3) SR20DET Starter motor with loom x1 not sure what speedo plug this is for my guess is that it is for a S14 5 speed $100

4) Passenger S13 side guard $50 there is a small dent

5) Clutch master cylinder to slave cylinder pressure line $50

6) CA18DE standard ecu $ free

7) Standard S13 front castor rods $ free

8) S13 front head light projector style $ free

9) Standard RB25DET exhaust manifold with studs $50

10) 180sx front LHS head light cover painted mat black and straight $50

11) S13 airconditioner condenser and dryer straight with not many bent fins $20

12) S13 standard front sway bar with good bushes $20

13) S13 CA/SR engine cross member $75

14) R32 RB20DET engine cross member $100

15) O2 sensors 3 pin x2 $50 ea

16) Standard S15 side mount intercooler with all piping $100

17) S13 HID instrument cluster with HID attachment speedo is at 105,649km no Tacho works perfectly $ 50

18) R32 GTR matched set crank, rods and pistons $200

19) S15 SR20DET VVTI head complete in fair condition $750

20) S15 SR20DET block bare fair condition $350

21) S15 SR20DET crank fair condition $150

22) S15 SR20DET standard injectors with rail and reg $100

23) S15 SR20DET Inlet manifold top and bottom $50

24) S15 SR20DET oil pump good condition $50

25) S15 SR20DET TPS excelent condition $50

26) S15 SR20DET harmonic standard balancer $50

27) Walbro 550hp intank fuel pump new still in box $150

28) SR20DET viscous engine fan $20

29) S13 brake booster fair condition $50

30) CA18DET igniter pack $ free

31) SR20DE distributors in excelent working order x2 $75 ea

32) S13 SR20DE engine loom complete un cut/murdered $25

33) S14a SR20DE engine loom complete un cut/murdered $25

34) RB25DET engine loom complete un cut/murdered $50

35) Complete S15 SR20DET VVTI in parts all that is needed is bearings and gasket kit. comes with ACL 20 thou over sized pistions with hasting pistion rings on standard rods with ARP con rod studs, complete head with port job and standard cams, freshly honed block and excelent crank, fresh oil pump and chain, fresh chain tensioner, standard harmonic balancer and engine mounts etc.

No turbo, distributor, coil packs, loom, computer, flywheel.

$ 1,250

I have pictures of all parts but my camera is to detailed and the pictures are upwards of 2.5MB so pm me your email and wahat your interested in and I'll send them to you. Sorry about the inconveniance

All prices are negotable pm me on here or call me on 0406 046 136

I'm located in Ipswich QLD.

Cheers

Luke

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...