Jump to content
SAU Community

Recommended Posts

Item:R34 GT-R 6 Speed Gearbox

Age:2000 model V Spec

Condition:Very Good 18k klms

Price:$3300

To Fit:Any GTR, GTS-t, GT-T

Location:Perth

Contact:0405901010

Comments:Selling due to upgrade to Dog box, dont want to break original getrag box. Never raced, used as a weekend car until end of engine build which will be taking over by dog box.

Willing to freight anywhere in Oz for $100 on pallet secure freight insured.

Edited by F u r i o u s

with the 6speed and knowing that the attessa works faster on the R34 gtrs than R32 n R33...can the attessa control module be used from R34 to R32 GTR's and get the same response? Also the transfer case having a lil pre load to it from the newer models.

can this be done?

sorry 2 H/J good luck with sale

with the 6speed and knowing that the attessa works faster on the R34 gtrs than R32 n R33...can the attessa control module be used from R34 to R32 GTR's and get the same response? Also the transfer case having a lil pre load to it from the newer models.

can this be done?

sorry 2 H/J good luck with sale

I dont think thats possible, you'd have to change the pumps and all the electrical gear to get your 32 going like a 34. (tho i dont know what is actually different)

i am not 100% sure whats involved, but probably a waste of time as you can get controllers that bring up the 32's response time with the 4wd..

what i can tell you is putting the 34 Getrag into my 32 was probably the best modification to date (engine rebuild will probably win now). it was costly when i did it. i spent around 8k including a clutch.

its reminded me of the days when i had a close ratio box in my Gti-r. i don't know about others but i just seem to like close ratio boxes..

As for power handling of the getrag, don't believe what you hear they are strong boxes!! 500hp at the wheels with a fair bit of abuse and still good :(

hope this sells your box :P

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Greg speaks wisdom. These dirty old Datsuns are only value when they are cheap. When they are not cheap, there is no value. Sounds contradictory, but it's true. We are now 20 years past the hey day of modifying cheap 90s JDM cars for small amounts of money. This is a different world. If you are rich and can afford not to care about what is effectively wasting money on an old Datto shitter, then I have no reason to argue against it. But if you are wanting to experience what we all experienced back in 2005 (and I bought my car last century!) then there is no way to do it.
    • Short answer: No. Medium answer: No, because you still need to conjure the things out of thin air to bolt them to a NA to make it a NA+T. Long Answer: No - The things you need to conjure - meaning a turbo, intercooling, manifolds, exhaust, intake/manifold/piping, clutch, injectors, fuel pump, AFM (?), ECU + Wiring (woo, N/A loom fun) have to come from somewhere. You could have many scavenged these things from an OEM car that someone had upgraded from and use some of these. This will be cost prohibitive now, especially so in the USA. You'd probably pay the same for newer, upgraded components that are better than old OEM stuff from 25-30 years ago. None of these big ticket items are re-usable for the N/A car. Why not buy new and upgrade while you're there? The only real consideration is turbo and fuel sizing and determining whether you want to stay within the bounds of the OEM engine or get into rebuild territory. These limits ARE lower with a N/A motor and especially N/A gearbox at the starting point. And if you're gonna upgrade those then you may as well consider having them built to begin with. Because everyone here knows you're never far from that next engine rebuild once you start making the power you want... The cars you see on the internet and SAU etc have been built over decades. If you're really clued in... you would sell your US car to somebody for what you paid for it. You would then scour AU JDM pages or SAU and buy a car like Dose's on this forum with your powerful American Dollar. This will save you so much money in the long term. Importing it could be tricky. Or it might not because USA. I have long said the only reason 90's Japanese stuff took off was because a) Japanese people had Japanese cars so that is what they used b) Australians could import these cars to Australia with very minimal changes and use them on the road here c) Neither country had well-priced access to US or EU Sports Cars. I don't believe the JDM scene would have taken off in Australia at all if we had EU priced EU BMW M offerings, or more especially the AUS V8 Scene would never have existed if we had the multitude of US cars like Camaros, Mustangs, Corvettes at the prices you folks do. After all - Do the math. I would say put a V8 in your R34 and that's the smart way forward. It is. I did it. I know this from my own experience. But at that point there's no reason to simply not buy a C5 or C6? It would be simpler and easier and cheaper and bette-
    • Reading all this... hurts lol. I have an ENR34 5MT and I paid an inflated USA price for the car alone, had to do tons of preventative maintenance past that, and so I'm over $30K USD into the car already and haven't even touched power.  I wanted to +t it. Not even trying to make GTR numbers, I'd be happy with 250hp.  Can I get away with paying much less to make that happen?
    • Damn you’ve done well, definitely snapping necks.
    • Great weekend and event. Open fire at the caravan park, perfect weather all day and a great feed and a couple of drinks at at awesome country pub.
×
×
  • Create New...