Jump to content
SAU Community

Airbox And Exhaust Question

beemer395
 Share

Recommended Posts

beemer395 Contributor

beemer395

Posted
Posted (edited)

Hey guys got a defect tonight for my pod filter and will need to return it to stock. Just a quick question ive only had this car for less than a week and wanted someone to confirm weather my car still has stock airbox and a pod filter attached or is this unit aftermarket? ( i dnt know shit about nissans lol)..if that the case i will just have find a snorkel correct? I have attached a pic of my engine bay?? are r33 airboxes interchangable with r34's??

And does anybody have a stock airbox snorkel and all for sale its an R34 sedan if that makes a difference??

Also did they sedan originally come with a twin tip muffler?? this car has been fitted with a cannon which i hate could anybody recommend a good twin tip that will be as quiet a silent?? the rest of the exhaust is stock..

post-33553-1211114023_thumb.jpg

post-33553-1211114150_thumb.jpg

Edited by beemer395
Link to comment
https://www.sau.com.au/forums/topic/219814-airbox-and-exhaust-question/
Share on other sites
TAKUSHI Proficient

TAKUSHI

Posted
Posted

well by the looks of things the pod filter is secured by a bracket, now over here in perth you can have

a pod as long as its secured an doesnt move about but depending on what your regulations are over where you live

then you might be able to get away with it

as for exhaust i rekon you'll have to get the stocker twin tip muffler for it, which will be the cheapest quietest option for it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • DraftySquash
      Looking for someone with a R34 front bar

      By DraftySquash · Posted

      Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Dose Pipe Sutututu
      new 1.5 LSD issues/concerns

      By Dose Pipe Sutututu · Posted

      Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...