Jump to content
SAU Community

Recommended Posts

Hi guys,

Just curious as to wear you'd have to go or if its even possible to tint the rear tail lights of your car to black?

I have an R34 25GT (2 door) and i wish to make the inner and outer circles black or atleast a shade of black, while obivously still retaining the light comming through at both day and night.

I know theres specific places for certian models where you can buy shadow and "smoked" lenses for your cars, but im not too sure there is a smoked rear tailight revision for 34's.

And yes i HAVE seen it done, i wish i had a picture but i saw it on the road, but as whack as it sounds on a 34, with the white paintjob it looks sweet!

If a DIY was to be done, how would you go about it, any help at all on this would be appreciated!

Thanks :banana:

Link to comment
https://www.sau.com.au/forums/topic/222212-tailight-tinting/
Share on other sites

nightshades is a spray in a can. avail at your local supercheap or autobarn. only thing is it dries matt and looks ghey, unless you clearcoat it or keep it polished. remember the blacker the tint, the less light, and the more defectable the car

nightshades is a spray in a can. avail at your local supercheap or autobarn. only thing is it dries matt and looks ghey, unless you clearcoat it or keep it polished. remember the blacker the tint, the less light, and the more defectable the car

Spot on Bevan.

More spot on, and true to bevans form, is that if you tint the rear lights, and you have an accident where you are hit from the rear (not your fault) it will become your fault for not having lights working to the ADR's.

Legal taillights FTW!

follow this and ull be set.

helped a mate on another r34 do it, looks quite sick, although i can imagine it lookn nicer on a white r34. with a black and white theme going on.

http://www.350z-tech.com/zwiki/How_to_Smoke_Taillights

follow this and ull be set.

helped a mate on another r34 do it, looks quite sick, although i can imagine it lookn nicer on a white r34. with a black and white theme going on.

http://www.350z-tech.com/zwiki/How_to_Smoke_Taillights

Well thats exactly what i was going for, black bonnet, white 34, matt black rims, smoked side and front indicators (Gen Nismo) with the finishing touch being EXACTLY like the tailight finish on those 350z's would make it quite unique.

Thing is i would imagine the 34 light would be harder to do without the runs than the 350 lights, especially the buffering part, so im a bit put off by the fact that I might screw it up. I wouldn't mind paying someone to do it for me if they have done it before. NRG if you can get some pics by any chance when you finish your mates 34 and post em or send em my way would be great! This is exactly the finish i want on my lights 100%.

I've only seen em like i said on the road and i havn't seen a good shot of them up close to see if they look dodge or not. Thanks for that Nrg that was really helpful :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...