Jump to content
SAU Community

Price Drops - R33/r34 Cusco Camber Upper Arms, Turbosmart Vee-port Bov, Brembo/r33/r34 Brakes, Jun Bl Muffler, R33 3" Catback Exhaust, Seats, Freebies


Recommended Posts

Selling the follow parts all located in Adelaide but will post at buyers expense. Contact me via SMS on 0404998591 or PM me. Not looking for SWAPS unless you have a FC Datalogit, Wideband O2 Sensor kit, Splitfire Coilpacks, Aftermarket Sidefeed injectors to suit SR/RB or a good aftermarket clutch setup to suit R33 GTS-t.

-----------------------------------------------------------------------------------------------------------------------------------

BOVs

HKS Sequential BOV complete with hotpipe to suit R33/R32 (RB25/RB20) but could be cut/modified for other cars. SOLD

hksbovkc9.th.jpg

hksbovpic2hu7.th.jpg

Turbosmart Type 2 Vee Port BOV complete with intercooler pipe this is the modern version not the old blue/orange version often seen. Price - $110

-----------------------------------------------------------------------------------------------------------------------------------

Brakes & Hubs etc

R33 Front Calipers complete with lines, pads, clips, shims, pins etc - Price $280

r33frontscj5.th.jpg

R34 Rear Calipers, Rotors, Pads, lines, Clips, Pins etc - SOLD PENDING PAYMENT

r34rearkc6.th.jpg

R33 Brake Booster + Master Cylinder (Non ABS) - Price $100

bmcboosternn7.th.jpg

R33 Front Hubs, Uprights etc - Price $200

uprightsim1.th.jpg

EOI on the following as will keep either depending so pm me with offers for either R34 Brakes or 350Z Brembos

R34 Front Calipers and Rotors complete with as new pads CURRENTLY ON MY CAR SO NO PICS ATM

350Z Track Edition Brembo Brakes both Front & Rear complete with rotors, pads etc these are the same size etc as R34GTR Brakes

-----------------------------------------------------------------------------------------------------------------------------------

JUN BL Muffler - this is the rare model like Marky used to run with the angle cut tip with JUN BL embossed into the side of the tip complete with ~60cm of pipe and flange! Cost $600 new used for the last 11 months sell for $250 $200! If anyone is interested in buying this to suit R33 can supply complete exhaust for extra

junblcn7.th.jpg

----------------------------------------------------------------------------------------------------------------------------------

Jap R33 3" Catback Exhaust with Stainless Muffler in excellent condition - Price $250

----------------------------------------------------------------------------------------------------------------------------------

Brand New R33/R34 Front Cusco Camber Adjustable Upper Arms have just been trial fitted but never driven on as have changed plans on car so now up for sale - Paid $500 Sell for $450ono

----------------------------------------------------------------------------------------------------------------------------------

GAB 8 Stage Damper Adjustable Shocks complete with lowered springs ready to bolt into your car. Shocks are in excellent condition, have been fully dissembled and checked, absolutely no leaks or knocks and can be adjusted from stock stiffness to rock hard in seconds. Perfect for those who want more control over there handling at the click of a dial. These will fit R33/S14/S15 although were removed from R33. Price $125

gabshockershq5.th.jpg

-----------------------------------------------------------------------------------------------------------------------------------

Boost Controller - electronically activated boost controller valve allowing you to run stock boost and then at the flick of a switch run the boost level you set on the valve. Needs a switch as the one I used for this is still mounted on my console and too difficult too remove again :(SOLD

boostcontrolleryo4.th.jpg

---------------------------------------------------------------------------------------------------------------------------------------------

Z32 AFM Plugs + ~30cm of loom ready to splice or wire into your loom to run Z32 AFM in excellent condition. Come complete with instructions on wiring into SR, CA & RB Powered Vehicles

Price - $30 Delivered or $20 pickup

z32ru8.th.jpg

---------------------------------------------------------------------------------------------------------------------------------------------

Pair of R33 Front Seats in excellent condition. The drivers seat has a small tear in bolster nothing major. This is the comfy plush velour type model with the adjustable side bolster wings for more support through corners etc.

Price - $150

---------------------------------------------------------------------------------------------------------------------------------------------

Freebies

Pair R33 Front Castor Rod Chassis Mounts

Pair S13 Rear 4 Stud Hubs

---------------------------------------------------------------------------------------------------------

Location - Adelaide

Contact - SMS 0404998591 or PM

Pics of all bits will be up tommorow

Sorry forgot to add the following:

Set of 6 x S15 480C Injectors in excellent condition ready to install suit RB25DET perfect for those chasing under 300rwkw Price - $350 Delivered Registered Post

350Z Track Edition Brembo Brakes both Front & Rear complete with rotors, pads etc these are the same size etc as R34GTR Brakes

hey mate how much u want for these? i couldnt see a price pm me if u want

  • 9 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...