Jump to content
SAU Community

Recommended Posts

Nearly complete solution for a large turbo setup, just add the turbo. Comes with Xforce high-rise manifold and a custom 4" front pipe which plumbs up nicely to the normal mounting position. The wastegate is plumbed back into the front pipe. Wastegate is a Turbosmart Progate 48MM. The manifold and wastegate have done around 2000klm's and are in EC. It comes with the two Vbands clamps and 7+14 psi springs.

Manifold cost me $600 Progate cost $850 4" Exhaust $400 = $1850

Selling for $900

No offers thanks.

First with a deposit gets it.

Cheers

[email protected]

post-1044-1215521449_thumb.jpg

post-1044-1215521474_thumb.jpg

Nearly complete solution for a large turbo setup, just add the turbo. Comes with Xforce high-rise manifold and a custom 4" front pipe which plumbs up nicely to the normal mounting position. The wastegate is plumbed back into the front pipe. Wastegate is a Turbosmart Progate 48MM. The manifold and wastegate have done around 2000klm's and are in EC. It comes with the two Vbands clamps and 7+14 psi springs.

Manifold cost me $600 Progate cost $850 4" Exhaust $400 = $1850

Selling for $900

No offers thanks.

First with a deposit gets it.

Cheers

[email protected]

$800 cash on pickup?

Not much while its been in the shed. When it was in the car I had yet to wind it up as I kept lunching clutches. The 25/30 has forged internals and runs a 8.5:1 comp so I can happily blow 20psi down its neck when I have finished Pharking around with it. :)

Sorry about the delay in pic's. Definitely going up tonight guys. BlackR33, I have a multiple buyers that are close so it's still $900 and the first in with a deppie gets it!

All PM's replied.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
    • Does the scanner do all the CUs in the car, or only the ECU?
    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
×
×
  • Create New...