Jump to content
SAU Community

Recommended Posts

there is a high and low setting in the power steering

now low is for under 80km/hr and high is for over 80km/hr

the high setting is where 4ws kicks in. the steering is also heavier than on the low setting

when the steering wheel moves more than 20 deg. (correct me on this one guys) either way the rear wheels flick in the opposite direction 1 deg until the steering wheel is returned to lower than the 20 deg set by nissan

if im wrong here will anyone correct me on it

Link to comment
https://www.sau.com.au/forums/topic/22804-hicas-4ws/#findComment-489330
Share on other sites

HICAS is Nissan’s version of four wheel steering. It is an acronym for High Capacity Actively Controlled Suspension. Unlike other Japanese car manufacturers 4WS (eg Honda’s system) HICAS never exceeds +/- 1°. It is designed for high speed response rather than parking manoeuvres.

The system is electro-hydraulic - the ECU in the boot directs a hydraulic actuator at the rear axle to steer the rear wheels using the rearmost suspension links. The result is usually no more than 0.4° of movement. HICAS gives a touch of counter steer before settling with the rear wheel pointing the same way as the front. (Maybe this explains why my Skyline feels so loose on high-speed gravel...) This results in sharp turn-in, and enhanced stability at medium to high speeds.

off this website.....

http://www.overflow.250x.com/diagnostics.htm

Cheers

Lawrence

Link to comment
https://www.sau.com.au/forums/topic/22804-hicas-4ws/#findComment-490021
Share on other sites

how do i know if i have it guys?

i can see the outline of what seems to be a hicas light on e dash but it never have even lit up before.

my mechanic told me that some cars have hicas and it doesnt light up when starting or ever unless theres a failure or sumfin sumfin

any easy identifiable way to find out?

Link to comment
https://www.sau.com.au/forums/topic/22804-hicas-4ws/#findComment-492890
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...