Jump to content
SAU Community

Sil80

SLY-L20
 Share

Recommended Posts

SLY-L20 Community Regular

SLY-L20

Posted
Posted

hey guys its time to say good buy to my pride and joy... lots of money has been spent on it and would not take a lot more just to tidy up a couple things!

well this is what it has.

RB25/30 with new chrome rings and race bearings. (using the turbo head not the shitty non vvt head)

fully rebuilt garrett 35/40 turbo

50mm external gate

stainless manifold

3" exhaust with hot dog and cannon out back (makes for a mean sound!!!)

Sard 550cc injectors

Nismo adjustable fuel pressure reg

genuine GReddy inlet plenum

80mm billet throttle body

$1200 just spent on rebuild kit for the OS Giken twin plate

brand new 52mm alloy radiator (works VERY well) with twin thermo's

tube and fin 300x600 fmic

brand new adjustable cam gears (isc)

Q45 afm

Remapped ECU by jeff from speedlab/turbo tune

shimmed R33 diff (1mm shim = locked)

sparco mesh rims 17x8 and 17x9 powder coated white about 4 months ago

tien HE coilovers

just jap rear camber arms

race bucket seat

momo steering wheel

HKS EVC 3

speco boost, oil pressure, and water temp gauge's.

autogauge monster techo with shift light (just needs to be hooked up)

uras rear bar, origin agressive skirts (old style i have been told) and ill throw in a new front bar for the sale. buyer can choose what they want as long as it comes from viva

NEW GEARBOX NOW IN

NOW WITH 3 MONTHS reg

it was tuned on 16psi and it made 291rwkw at only 6700rpm. should see 350+ if you up the boost to 19 or 20psi but i left it at 16psi just for safety. the engine has only done about 600k's since the new rings and bearings where put in.

extras that come with car are. 2 x RB30 blocks, oil cooler, new front bar as the on on there is a bit average, and turbo smart BOV

there is probably heeps that i have left out but just come look.

Looking for around the $15k $13,500 or swap for R32 or 33

freshwheels2-1.jpg

Firstoutingwithrb.jpg

freshwheels.jpg

21032008003.jpg

15032008004.jpg

15032008003.jpg

GReddy.jpg

GReddy2.jpg

enginebay1.jpg

enginebay2-1.jpg

enginebay3-1.jpg

gauges.jpg]

Link to comment
https://www.sau.com.au/forums/topic/230418-sil80/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Butters
      UniClutch

      By Butters · Posted

      Well they got my money but they are not getting my gearbox ! 
    • GTSBoy
      ECU sees many times the speed than speedo does (R34 swap)

      By GTSBoy · Posted

      It's needed for rolling idle up, and I think it is a decider on VCT also.
    • Kinkstaah
      ECU sees many times the speed than speedo does (R34 swap)

      By Kinkstaah · Posted

      I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...