Jump to content
SAU Community

Recommended Posts

its the bushes on the armature.. not a loose nut holding the fan on(it spins in tightening direction). you need some conductive grease on the armature/brushes.. or a whole new setup.

thanks for the reply. pardon me for being a noob. How do i get to the location of the armature? i need to investigate the problem. Please point me to the right direction. cheers

Edited by Giveitall
ive done a write up in the faq section.. searching this section will give you the rewards your after

thanks mtopxseret6. Will have a crack at it.

for anyone looking to solve the problem. heres the link to mtopxseret6's write up.

http://www.skylinesaustralia.com/forums/Fa...hl=mtopxsecret6

Edited by Giveitall
excelent write up mate! just need some better pictures :thumbsup: i might give mine ago in the next few days and thats in a 33 so ill fill in the blanks at the start of your guide so we have one for a 32 and a 33.

that would be excellent jack. i m not a handy person myself. will definitely need your guide for the r33.

keep us updated.

Just notice that you are in SA too. (maybe i can pay u for your service for this?)

thanks

Edited by Giveitall
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've replaced the front brakes of my NA to 324 brembos and 350z calipers: i'm going for 225/40-18 up front and 245/35-18 in the back. I have Rays 7.5*19 ET35(225/35) in the front with 5mm spacers otherwise the calipers "lock up/ won't rotate". When i use the calculator i come up with 8*18 ET30 for 225/40...... but not sure i get problems with the calipers. Anyone riding around with 18 inch. that can confirm "that it'll fit"? In the back it's 7.5*9 ET30 (245/30) with the 5mm spacers, but there is no problem with the standard small brakes, so i want to take 8.5*18 ET25 (245/35).
    • Lol.. but then.. always come back to a JDM..
    • Glad to hear. If possible, get your tuner to check air's to make sure everything is still where it should be.
    • The problem with FB/Insta/Reddit etc comments relating to cars is simple. You get to ask a question once, and get one round of replies. For things that can actually be answered in a few lines of text, once, it's fine. After 6 hours, your original question is lost to the void. There are no follow ups, additional questions, anything. No project car is ever such a simple list of questions to ask. You need discussion.
    • Welcome.  Here's what I have noticed about forum vs FB..... FB; seems to be wallet racing, and the same few questions asked over and over. There *may* be some groups that are closer knit, but most have changed for the worse. SAU; unfortunately, no longer in its glory days. But....genuine people with similar interests. Not all about how much you spent and saying you dont have enough power. Sooooooo much knowledge available. Have personally seen people post up about literally topics I made myself, asking on FB like no one has done it before. Most has been done, and most of that is here.   If you ever feel like just general chatting theres the wasteland.  Other interests are also generally covered in other areas of the forum. Hope you enjoy hanging around. We would love to have you.   P.s. nice 32 😀 
×
×
  • Create New...