Jump to content
SAU Community

Adr - 83

DaGr81

By DaGr81,
in New South Wales

 Share

Recommended Posts

DaGr81 Mentor

DaGr81

Posted
Posted

guys I just read an article in zoom according to this we are allowed 95db exhaust noise level, what I don't get though is in the article it said they have only to DECC approved defect clearance stations in nsw, the granvilled 1 and campbeltown 1 now I've had a defect cleared else where, so I'm assuming that you only have to go to these 2 if the police request you to go here or if the EPA defect you, otherwise it's ok to go to any blue slip place, am I correct to assume this or what? Can some one elaborate on this cheers

Link to comment
https://www.sau.com.au/forums/topic/234872-adr-83/
Share on other sites
MRGTR911 Experienced

MRGTR911

Posted
Posted
guys I just read an article in zoom according to this we are allowed 95db exhaust noise level, what I don't get though is in the article it said they have only to DECC approved defect clearance stations in nsw, the granvilled 1 and campbeltown 1 now I've had a defect cleared else where, so I'm assuming that you only have to go to these 2 if the police request you to go here or if the EPA defect you, otherwise it's ok to go to any blue slip place, am I correct to assume this or what? Can some one elaborate on this cheers

if they have ticked on your defect notice only one of these 2 people can clear your defect then you have to go to one of them , if i was you id go to the cambeltown guy, im talking from experience the guy at granville is the biggest d******** ,

take a picture of your defect notice post it up so we can see what your in for ??

Link to comment
https://www.sau.com.au/forums/topic/234872-adr-83/#findComment-4124568
Share on other sites
MRGTR911 Experienced

MRGTR911

Posted
Posted

http://www.skylinesaustralia.com/forums/En...amp;hl=mrgtr911

I Found my old link from when i had my r32 gtr, i too at the time had big preoblems , that was a big pain to pass but after it was over i knew all the tricks in the book so if you need help shoot me a pm ...

Link to comment
https://www.sau.com.au/forums/topic/234872-adr-83/#findComment-4126888
Share on other sites
MRGTR911 Experienced

MRGTR911

Posted
Posted
cool thanks mate, you reckon they will engineer a fmic if i have already had a emissions test done?

my car passed emissions with FMIC , Filters , 3 1/2 exsaust , Engine mods , it is possible but i had to get a re tune done which cost me about $1000 , it was done By HITMAN in penrith , if you ever have any problems passing your emission testing as in if you cant pass just take your car there and hell sort it out for you...

Link to comment
https://www.sau.com.au/forums/topic/234872-adr-83/#findComment-4129395
Share on other sites
MRGTR911 Experienced

MRGTR911

Posted
Posted
did the engineer do a noise test for the exhaust? or was it under 91db?

didnt get it engineered , problem solved though as i bought a varex muffler electronic silencer kit , when i get pulled over press of a button car goes quiet , so car can be as loud as you want but press of a button makes it so quiet , good for neighbours and stuff..

Link to comment
https://www.sau.com.au/forums/topic/234872-adr-83/#findComment-4129815
Share on other sites
MRGTR911 Experienced

MRGTR911

Posted
Posted
ahhh k , yes was also looking into this for the exhaust. just a bit pricey atm. where did you get yours done at?cheapest i have found is $400 of boost (the muffler that is)

I Got it fitted wired everything it was about $550 bucks which is reasonable price , Place called WESTERN MUFFLERS Hes on fairfield St In Fairfield . he does alot of work on my R34 GTR ....

Link to comment
https://www.sau.com.au/forums/topic/234872-adr-83/#findComment-4130119
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • MBS206
      Slight brake pedal stutter after new pads

      By MBS206 · Posted

      Johnny is sad now... Because you didn't get Bosch Motorsport ABS.  
    • PranK
      Slight brake pedal stutter after new pads

      By PranK · Posted

      Hey keep the ideas coming, I'm always keen on projects! But, problem fixed!  I got a cheapie ozito scope from Bunnings and had a good look in and around the bearing and sensor hole. I couldn't see a smoking gun but the bearing looked a bit strange, especially when comparing with a new one. I thought the cover had come off the bearing magnets.  Sorry for pics of a screen, I didn't have an SD card.     Good thing I had the old one to inspect. So, given I'm like a pit crew with wheel bearings and luckily I had a spare bearing because I f**ked up my parts order, I decided to just smash it out. Got the old one out in about an hour. So much easier when the parts haven't had a chance to rust together yet. 😂 And, well, found the problem.    In the second pic at about the 8 o'clock position, you'll see what I think is the tip of the old sensor.  The new sensor has definitely been rubbing but it's all intact, just a little shiny so I'm hoping it's fine.  The car brakes perfectly now and no errors.  I think the job took about 2.5h in the end. 👍🏻 I really appreciate the help in here as usual. Thanks guys.
    • Chupapy
      Help please! Hole ontop of box?

      By Chupapy · Posted

      I was only looking because I saw some drops on the ground but it wasn't alot. Recently had it serviced will ask the mech to confirm. Find it strange that it looks standard though, can see in another photo of a random box 
    • Duncan
      Help please! Hole ontop of box?

      By Duncan · Posted

      So...not sure if you know if that has always been there or why you went looking. It could be old damage from a clutch explosion, or even just the gearbox got dropped somewhere along the line. Basically, you should seal it up to stop oil and dust getting into the bellhousing, but it doesn't matter too much and is not structural. I'd suggest something like a glob of JB Weld. BTW what gearbox oil are you running, I would guess the breather has been spewing it everywhere.
    • Chupapy
      Help please! Hole ontop of box?

      By Chupapy · Posted

      Hey Duncan thanks for your reply. Sorry mate I know the photos are shit.  Took another photo for reference. Seems the casing does have a hole in it looking on the net, fluid seeping out. Added a photo   
×
×
  • Create New...