Jump to content
SAU Community

Recommended Posts

Hey im new ish i guess, and im about to buy my first car which as the topic description says Its a 99 Skyline r34gt 2 Door Non turbo which is good because i cant drive turbos (P plates) I had a look at it last weekend and the exterior is in pretty good condition other then few chips here and there. The interior is in rather good condition to just needs a good clean and detail. Everything with it checks out, not stolen etc etc, He had a accident recently with a kangaroo lol...Only damage though was to the front kit and a bar just behind the kit was bent slightly, but its all being replaced/fixed under insurance as we speak. Very very smooth drive aswell, rather amazed actualy...

Only thing is hes selling it for $14,000? :P it seems oddly cheap? i could be wrong but... what do you guys reakon?

All stock except a aftermarket muffler.

Uh whoops ive posted in the wrong section...sorry, could a mod please move this to General Automotive Discussion

Edited by Darkplague
Link to comment
https://www.sau.com.au/forums/topic/235430-about-to-buy-first-car/
Share on other sites

The interior may be nice but you'll be better off getting the underside of the car checked. That's where the real damage will show, if there's any at all. There's a terrific thread in another forum about What to look for when buying a Skyline.

Good luck with your purchase!

The interior may be nice but you'll be better off getting the underside of the car checked. That's where the real damage will show, if there's any at all. There's a terrific thread in another forum about What to look for when buying a Skyline.

Good luck with your purchase!

Thanks, and yeah its getting a racq check in the next week or 2.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...