Jump to content
SAU Community

Recommended Posts

hey guys

im currently building a rb26 out of a r32 it was rebuild 10000ks ago with forgies new standard oil pump ect.... but it still has the standard 32 crank? its got hks gtss im looking to make 400rwhp the car it only a street car should i get a 33 crank or leave it?

thanks

Link to comment
https://www.sau.com.au/forums/topic/235725-r32-gtr-crank-replace-or-not/
Share on other sites

think about it u got the motor apart any way so you mine as well, like this guy at work rebuilt some kia sh*t box and re used some of the piston rings??? lol stupid aye, but yer do the crank since it is apart.

i left my crank... hks pistons, eagle rods, balanced bottom end... 9k isnt a problem for it.. but i replaced my balancer for an ATI one.. :laugh:

builder said my bottom will live beyond 9k without raising a sweat... its in the balance i reckon

just out of curiousity is anyone running the n1 pump without the collar? I didn't like the looks of the collars as you have to carve down the standard crank so it fits on then drill holes in the crank, which didn't sound like it'd do many favours to the crank strength >< the n1 pumps fit onto the standard 32 crank, just not fully on (like about 2/3rds of the way on)

Edited by GTAAAH
just out of curiousity is anyone running the n1 pump without the collar? I didn't like the looks of the collars as you have to carve down the standard crank so it fits on then drill holes in the crank, which didn't sound like it'd do many favours to the crank strength >< the n1 pumps fit onto the standard 32 crank, just not fully on (like about 2/3rds of the way on)

Stongly suggest not to do that, the inner gear will crack over time, not enough engagement on the crank. There are pics on what happens to the oil pump gear.

Can't see why a stock r32 pump wouldn't fit on. Wouldn't it drive all of the pump with an r33 crank?

oh really? i've seen them crack under stress and that sort with the collar kits as well :S Will have to make a decision eventually, builds being done atm (very slowly), but at least the n1 pumps will take more flack before letting go than the standard ones will, either way i spose

sum1 told me that the standard oil pump sits on about as much as the n1 would anyway? can sum1 confirm

Edited by GTAAAH

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...