Jump to content
SAU Community

Recommended Posts

That's freakin' cheap. Mine was $3k plus tyres.

MAKE SURE you ask what is included with the $2.5g! You don't wanna be slapped with extra charge of this and that especially with your aftermarket parts, they'll probably gonna charge you labour cost to remove them, fit std parts on for compliance, then refit your parts back on after compliance, that could sting a bit.

could be an earth wire kit (I hope for your sake) which is said can improve voltage stability and give a bit more power, regardless whether you're skeptical about it or not...

if it's some dodgy wiring from previous owner, then I wish you the best of luck it didn't stuff up

welcome to the world of importing cars from Japan!

don't let the rarity of an expensive jap wheel deter you at all. If anything its a plus that you're getting it with the car. You will also have slightly better re-sale value once you get sick of the wheels and want something else. Definately unique looking wheels and better than anything you can buy locally. I vote you keep it, and lower the car to suit :(

could be an earth wire kit (I hope for your sake) which is said can improve voltage stability and give a bit more power, regardless whether you're skeptical about it or not...

if it's some dodgy wiring from previous owner, then I wish you the best of luck it didn't stuff up

welcome to the world of importing cars from Japan!

Looks like a wiring earth kit and quite a well done one, as they can sometimes be everywhere.

don't let the rarity of an expensive jap wheel deter you at all. If anything its a plus that you're getting it with the car. You will also have slightly better re-sale value once you get sick of the wheels and want something else. Definately unique looking wheels and better than anything you can buy locally. I vote you keep it, and lower the car to suit :(

isn't it lowered already ? I cant afford anything else unless it's free :)

post-55737-1223298465_thumb.jpg

That's freakin' cheap. Mine was $3k plus tyres.

MAKE SURE you ask what is included with the $2.5g! You don't wanna be slapped with extra charge of this and that especially with your aftermarket parts, they'll probably gonna charge you labour cost to remove them, fit std parts on for compliance, then refit your parts back on after compliance, that could sting a bit.

The 2.5g doesnt include tyres. I was told that the tyres on the car are in good condition so therefore didn't need to buy new ones. And how much can they charge to take things on and off cant be more then a few hours work , so anothe couple of hundred max .

Manda-those wheels are hot dont loose them just yet. The biggest issue is the fact that they are 20Inch which means rubber is expensive. etc. fact is you will scratch any rim at some point. Worry about it only when you've knocked them round a bit.(swap them if you must for 19's)

My 05 premium is chipped (not sure but must be Impul from all I see/hear), and has the slightly bigger exhaust. It runs like a Dream on 98 Oct so dont panic. No problems starting at all !. The power output at the engine with the chip & exhaust will get you around the 221kw (298Bhp)or over 200 hp at rear- no problem.

Compliance cost 3K+GST. (three people quoted exactly that figure)). Exhaust changes will be at cost to remove then replace once complied. +Tyres separate.

As others have said check they are doing everything.

Sorry-they are 19inch rims-Just unusual to run 35 profile. Normally run 40 for 19's. But shes running slightly wider fronts 245 (i/o 225) so guess that offsets.

Manda-those wheels are hot dont loose them just yet. The biggest issue is the fact that they are 20Inch which means rubber is expensive. etc. fact is you will scratch any rim at some point. Worry about it only when you've knocked them round a bit.(swap them if you must for 19's)

My 05 premium is chipped (not sure but must be Impul from all I see/hear), and has the slightly bigger exhaust. It runs like a Dream on 98 Oct so dont panic. No problems starting at all !. The power output at the engine with the chip & exhaust will get you around the 221kw (298Bhp)or over 200 hp at rear- no problem.

Compliance cost 3K+GST. (three people quoted exactly that figure)). Exhaust changes will be at cost to remove then replace once complied. +Tyres separate.

As others have said check they are doing everything.

Manda-those wheels are hot dont loose them just yet. The biggest issue is the fact that they are 20Inch which means rubber is expensive. etc. fact is you will scratch any rim at some point. Worry about it only when you've knocked them round a bit.(swap them if you must for 19's)

My 05 premium is chipped (not sure but must be Impul from all I see/hear), and has the slightly bigger exhaust. It runs like a Dream on 98 Oct so dont panic. No problems starting at all !. The power output at the engine with the chip & exhaust will get you around the 221kw (298Bhp)or over 200 hp at rear- no problem.

Compliance cost 3K+GST. (three people quoted exactly that figure)). Exhaust changes will be at cost to remove then replace once complied. +Tyres separate.

As others have said check they are doing everything.

Thanks for your input. So is your chip impul as well and what does it do ? I have the fujitsubo exhaust system as well have you had it dyno tuned im curious to see. I was thinking about selling those wheels and getting something a bit cheaper to give me some money back from the compliance , etc.

Also yes they are 19" . The tyres are 245/35/19 and not sure about the rear maybe bigger. If i have to buy some more tyres i will be very angry ! What colour is yours and what wheels you got on it . Do you have any pictures . Mine is a 03 model.

Here is my o5 coupe. Not sure what the chip is. I know all standard V35's pull 206kw.Add the exhaust & chip and the I few a saw/test drove were all quoting 221kw(298BHP) which is easy to believe. You loose about 30% to the back wheels. (so near enough).

Look at the wheels another way-Check what you would get for em now & if its alot less than a decent set of 19's you will be out of pocket anyway. Better to hang on to them. otherwise choice is yours..

post-55154-1223853757_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...