Jump to content
SAU Community

Recommended Posts

Hi Everyone

Our next Day-Time High Performance Driver Training and Track Driving Day will be held at Sandown on Monday 17th November 2008.

We will be running the day as an 'open pit lane' day, but we will also have 4 qualified instructors with lots of experience.

You can have as much or as little instruction as you like.

We also provide lunch, tea / coffee / soft drinks , flaggies, and Racesolutions Motorsport medical / rescue crew.

You do not need a CAMS or ASSA licence to participate in our High Performance Training and Track Driving.

You also don't require any special modifications to your car.

The format we run to is: 3 groups of fifteen drivers, twenty minutes of track time per hour.

Start time is 8.30am for safety briefing, track is open from

9.00 am until 4.30pm.

Please give us a call during office hours to book your position

1300 652 693

Or email [email protected]

Cost is ONLY $245.00 per driver.

Any chance you have a rough idea when the next training/track day is? I'd love to go to this one but work has me booked up solid at least 6 weeks ahead at a time :laugh:

There are the Friday night track evenings.

Guest
This topic is now closed to further replies.


  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...