Need Help: Rb25det With Z32 Afm

[Skyline1989]

Hi all,

I was just wanting to know if a Z32 AFM is a must when using with an Apexi Power FC?

I have an ER34, so i don't know if i need to upgrade for my application... Power output i'm looking for is 250-280rwkws

I'm sure it has been covered multiple times... but i just wanted an easy/quick answer

Thanks

[Pattygtst]

for that power yes you will need z32

[abu]

Z32 AFM is not a must if you are using a Power FC. PFC is designed to use all your standard sensors and wiring so you don't need to change anything to make it work

Although for your power goals a Z32 AFM would be advisable as the standard would be getting pushed to it's limits

[Skyline1989]

I'm looking to just increase boost etc and head towards the 200-210 rwkw marker...

Would it be ok to use the standard AFM, then change to a Z32 when i get my turbo kit sorted?

Will i be paying more to retune the ecu with a Z32 AFM? (i could probably just as easily install a Z32 AFM when my fuel mods arrive aswell, so i get everything done when i decide to install my turbo) <<< would this be a logical path to building my engine?

Thanks

[bubba]

Would probably have to suck it and see.. I maxed my stock afm at 183rwkw on the RB30 but 183rwkw on the RB20 wasn't maxing it. Have heard of people pushing a bit more.