Jump to content
SAU Community

Stripping C33 Nissan Laurel

shawn_26
 Share

Recommended Posts

shawn_26 Explorer

shawn_26

Posted
Posted

Ive had my Laurel for sale for ages now and it seems there is not much interest in a defected car. So, if i get enough interest im going to strip it over the next few weeks and sell it in parts.

I will post a list of parts, descriptions, and prices as a guide. If you think the price is inadequate then make an offer. Some items I will remain firm on price, some will be negotiable. No reasonable offer will be sneezed at.

I will post pictures of everything i can over the next few days.

Im located in Brisbane, but will freight at buyers expence nationwide depending on the size of the item.

You can contact me via PM and we can talk from there.

1) C33 Laurel Shell - resprayed Cherry black recently. Body is in very good condition. I will sell as a roller, or as a bare shell depending on a price negotiated, and what parts are to be included. I will state a price at $2000 as a bare shell. Pics over the next few days.

2) RB20DET - Engine runs very good. Compression test will be done over next few days. I will post photos with results over each cylinder. Will sell engine with stock RB20 T3 turbo, and manifolds. $1000

3) RB20DET gearbox - Recently rebuilt by DanTrans. Very nice to shift with, tight gears, all gears engage very smoothly, nice short throw - $700

4) Racing Logic Ultra Complex coilovers - Fully adjustable base height, damper, and pillow ball camber plates on the fronts, good condition, very nice to drift on. Cost $2000 a set new, sell for $800 Pretty sure these fit S13, as well as Cefiro.

5) Whiteline swaybars - front and rear - Not sure what these are worth. If someone knows please let me know.

6) Locked R200 Diff - Very tight, never missed a beat. Cops a flogging and has never let me down. $350

7) Racing Logic hydraulic handbrake mechanism + cylinder - $150

8) R33 GTR Brembo brake rotors + callipers front, R33 GTST rotors and callipers rear - Again not too sure what these will fetch. I guess im open to offers on these.

9) Momo steering wheel and boss kit - $150

10) HKS 2535 Ball Bearing turbo - Very nice turbo. Good condition with braided water and oil lines, no shaft play - $1500

11) 3inch turbo back custom stainless exhaust - Very straight run, with cat, and Zetti cannon muffler. Sounds very nice without being overly loud. $600

12) Stainless 3 inch split dump pipe to fit T3 flanged turbo. Very good condition - $300

13) Superspark RB20 coilpacks with adaptor leads. Have driven less than 1000km with these installed. Cost 500 and something to buy new. Sell for $350

14) Cusco catch can. Good condition. Speedflow fittings. $150

15) GTR injectors - came off an R34 GTR Vspec II, so you could expect they would have done low Kms. Sell for $400.

16) Brand new 2 litre stainless surge tank with push on outlets. Never been used or installed - $150

17) R32 GTST front seats - Very good condition, no rips or tears, or ciggarette burns, nice upgrade to early model S13 or 180SX - $250 for the pair.

18) Racepro atmospheric BOV - $100

19) Cooling pro front mount intercooler with piping kit, very good cond, stainless piping with all silicone connectors and hose clamps - $500

20) Front and rear strut braces - As far as i know these will fit S13's aswell. Front is Cusco brand, rear is unknown. $100 each.

21) 16"x8" -4 offset Performance superlite rims. Driven less than 1000kms on these wheels. Perfect condition. Come with Falken tyres, fronts are almost perfect tread, rears are fairly f**ked as i did a practice night on them. $1500

22) Brand new Nissan R32 GTR injector resistor pack. Still in packaging, genuine OEM part. $150

23) Stock Nissan C33 Laurel front and rear bumpers. Front has had part of inside cut to fit FMIC, in good condition, will need a coat of paint. Rear is in good condition, again could do with a coat of paint. VERY HARD TO GET HOLD OF THESE! Took me months to try and track down both of them. $400 for the set.

24) R33, 5 stud hubs front and rear, Front has 75mm extended wheel studs installed. Not too sure what these are worth, would sell them by themselves or with the Brembos as a package.

25) Koyo motorsport aluminium radiator. Very good cond. $350

26) Rear subframe pineapples. Make an offer.

27) Pretty much every arm in this car aftermarket and adjustable. Hit me up with what you would like and i will name a price or Make an offer.

28) 25mm fibreglass front guards, painted cherry black. One has a slight crack in it, easily repairable - $250 for the pair.

29) Turbonetics 38mm external wastegate, good condition - $200

As i said pics will be up over the next few days. I wont be stripping until i see how much interest i can get. I would prefer to sell the whole car for around the $10,000 mark. But if your interested send me a PM and we can go from there. If you want the engine come and have a test drive while its still in the car.

Cheers, Shawn.

Link to comment
https://www.sau.com.au/forums/topic/247381-stripping-c33-nissan-laurel/
Share on other sites
shawn_26 Explorer

shawn_26

Posted
  • Author
Posted

CAR WILL BEGIN TO BE STRIPPED THIS WEEKEND - Detailed pics of all parts will be taken once they are removed. If you want an item, let me know and i will hold it for you as I am having a lot of interest.

excon Enthusiast

excon

Posted
Posted (edited)

whats the best price you would do on number 6 and7?? the diff and hand brake??

please sms me on 0422 845 840 thanx

oh and how much do you think you would want for the Brembo brakes??

Edited by excon
toffy Veteran

toffy

Posted
Posted

how much for just the front hubs (and whatever i need in a 5 stud conversion , apart from the brakes and calipers) mate?

actually , how much for the whole car as a roller minus motor gearbox diff and front seats ? (pm if you like :P cheers

STATUS Grand Master

STATUS

Posted
Posted

how much for complete roller? body, gaurds etc whole car minus running gear. i have been chasing a laurel to put my spare 26 in.

what state? if in vic i will come round asap.

shawn_26 Explorer

shawn_26

Posted
  • Author
Posted
whats the best price you would do on number 6 and7?? the diff and hand brake??

please sms me on 0422 845 840 thanx

oh and how much do you think you would want for the Brembo brakes??

Hey mate. Handbrake is sold. I could do the diff for $300. Brembos are sold also.

shawn_26 Explorer

shawn_26

Posted
  • Author
Posted
how much for just the front hubs (and whatever i need in a 5 stud conversion , apart from the brakes and calipers) mate?

actually , how much for the whole car as a roller minus motor gearbox diff and front seats ? (pm if you like :P cheers

PM sent

  • 2 weeks later...
  • 4 months later...
12slide Enthusiast

12slide

Posted
Posted

p.m me if you still have this please 3inch turbo back custom stainless exhaust - Very straight run, with cat, and Zetti cannon muffler. Sounds very nice without being overly loud. $600

  • 2 months later...
  • 1 month later...
cwinter Newbie

cwinter

Posted
Posted

Hey mate, this might be a long shot, but do you still have any of these?

Rear Sway bar

Momo steering wheel and boss kit

Front and rear strut braces

Front and rear bumpers

have the wheels gone?

And if available headlights?

Cheers Cohen

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...