Jump to content
SAU Community

Recommended Posts

You're not looking hard enough. If you look very hard you can find a r33 GTR for as low as $34,000 and an r32 GTR for as low as $25,000. :)

The reason they are coming down is because:

a) the R34 GTR has come down in price, pushing the price down.

B) the 15 year rule will soon have R32 GTR's coming in for as low as $14k which are pulling down the prices in anticipation

c) the car is getting older and less mysterious

d) riceboy kids in their GTST's are putting on GTR body kits, badging their car up as a GTR and bringing down the value of GTRs' in general.. the general publics best friends son has a gtr! duh!

ps. if you know one of these kids.. do all GTR owners and future GTR owners a favour.. take a baseball bat and beat him down like you are Tony Soprano.

Link to comment
https://www.sau.com.au/forums/topic/24851-r33-gtr-price/#findComment-528295
Share on other sites

horrid running cost inc. insurance.

also negative media exposure.

The Nissan Skyline is now the preferred playmate of the Subaru WRX.

The last R32 is a 1994. Last R33 is a 1997.

As it is, that's an old car.

I'm not slagging GT-R's off. I still want one. But you have to see the cold hard facts.

T.

Link to comment
https://www.sau.com.au/forums/topic/24851-r33-gtr-price/#findComment-528400
Share on other sites

Hey Tony,

I agree.. keeping any performance car on the road (running costs) can be dear, but I don't really see how a GTR could be all that much more to keep on the road than a GTST..

Assuming you get an oil change every 6000km's and don't go overboard with performance mods, and treat the car with respect.. not dumping at 6000rpm at every set of lights or winding the boost up to ridiculous levels. But the same applies to a GTST :wave:

Personally with a GTR i'd be less inclined to wind the boost up or do masssive clutch dump's because the GTR in base form is such a powerful drive.

I know guys who have Silvias (as well as other cars..) and are constantly getting new clutches, gearboxes, new turbo's after blowing them all up. I've probably done 100,000km's between my two Silvias and never had to replace any of those parts. I drive quickly but smoothly, and respect my car. And yeah.. i do the ocassional launch.. and I rarely get beaten at the lights..but I still have the same clutch :)

ps. this is mechanical repairs.. yes our insurance for these cars stinks.

Link to comment
https://www.sau.com.au/forums/topic/24851-r33-gtr-price/#findComment-528402
Share on other sites

Well, with the sport car market, the price is often determined by the owner's desperation to sell rather than quality because the market is so damn small. I saw a very nice R33 GTR for $36k and the owner really needed to sell for an overseas trip. Also, with imports you have no guarantee that a $50k example is any better than a $36k example, since you don't have much chance of being able to know exactly what kind of a life the car has ever had. I say this all from personal experience since my last car (an import) didn't fetch anywhere near the premium it deserved and there was bugger all I could do about it because potential buyers in the ~$50k bracket for an import are relatively rare. Also, when someone sees a ~$35k example, expectations adjust, not only from buyers, but also from insurers who put appropriate agreed/market value ceiling prices on the cars. I personally would never get a 'market value' policy on any import for that reason as it is now so easy for them to make it look like the market value is as low as they like.

Link to comment
https://www.sau.com.au/forums/topic/24851-r33-gtr-price/#findComment-528799
Share on other sites

Blitz: That's a fairly common generalisation. Like most generalisations a lot of the time its true, but for those members who are looking to buy a GTR.. high quality bargains can be found if you are persistent and look hard.

I agree with R_thirty_four. I have seen 60k r33 gtr's that even though they had low km's.. you could tell they had been driven as a racing car their entire life. The white one I drove had a stuffed gearbox, the engine was flogged and had laggy and inconsistent boost spool.. it had a big bodykit and all the nismo + apexi GFB's. Load exhaust.. massive BOV's.. I didnt want to pay some idiot for their modifications.

The two R33 GTR's i've inspected have both been very close to stock. One even still had the original exhaust system. Low kilometers, very smooth drive.. tidy interiors, no massive gauges or holes in the dash.. and had been regularly serviced, at least since it had landed in Australia. Both had been desperate to sell.. they'd had their cars listed for 40-50 for months with no buyers, only tyre kickers.

I know this because I am in the market to buy one quite soon, and have done MUCH tyre kicking. LOL ;)

Also i'm sure you could get Greg over at Prestige Motorsport to import one of these cars for you, for his fixed price service fee, at this cost.. and it would be a bloody excellent GTR. You're not paying a broker or middleman, helping a car yard pay the rent and wages.. you just pay a fixed $1000 importing fee.

Of course its a long wait until May next year :D

Link to comment
https://www.sau.com.au/forums/topic/24851-r33-gtr-price/#findComment-529207
Share on other sites

One thing people should be weary of when buying imports from the Japanese auctions is that in general those condition codes are determined from visual inspection. My ex bought herself a nice looking Mitsu FTO which had auction grade 4, only to find that it was so riddled with rust underneath that it's major structural members will only be able to hold out for a year or two at the very most. And there was apparently nothing she could do for recourse from her broker. Basically she ended up with a worthless heap of rust, which nobody sensible will buy from her. Importing a GTR or the like under a 15 year rule is a very risky proposition, not just for all the other potential problems, but also for this one. Japan has a much harsher climate than we have here. Snow can be a killer, especially after all those years. I wouldn't be surprised to start reading more reports of this kind of happening once those 15+ year old cars start arriving in volume (if they can).

Anyway, just something to bear in mind.

Link to comment
https://www.sau.com.au/forums/topic/24851-r33-gtr-price/#findComment-529249
Share on other sites

I'm just curious if there is any way you would have been able to determine the car had rust 'underneath' if you had actually bought the car locally?

I would be more concerned buying a car from an import yard that has fixed the car up.. in most cases these guys have to buy the cheapest peice of junk in Japan for close to nothing, then fix it up to make a huge profit margin.

At least these guys see the cars in the condition they are in before they are 'tizzed up' as most import yards have a tendancy to do.

Link to comment
https://www.sau.com.au/forums/topic/24851-r33-gtr-price/#findComment-530024
Share on other sites

I would tink that there are alot less risks involved when purchasing the car locally....since you would be able to personally inspect the car urself. (Of cos u need to know what u r looking at in the first place).

Every car looks great in photos so its hard to guage condition simply from looking at pictures....thats the danger involved with importing a car youself i guess.

Of cos the problem with import yards is that they either have heaps of junk tidied up to look spanking new....or a real jewel which u'd have to pay through your nose for.

I personally believe that most, if not all of the older imports that enter the country have had their mileages clocked. Think about how difficult it would be to achieve 65k on a 8 year old car....you would barely have to drive it.....its not to say its impossible, but just look at the sheer number of imports that have listed mileages between 65k and 85k and you would start to question it.

Link to comment
https://www.sau.com.au/forums/topic/24851-r33-gtr-price/#findComment-530188
Share on other sites

usuckpoo..

theres a few problems with your argument.

First of all, even though I know a substantial amount about cars, looking at cars, etc. I think that a highly trained professional inspector who looks at THOUSANDS of cars a week and is employed TO INSPECT CARS on behalf of his employers is going to know more than you or I.

"Cars always look better in pics".. Every single inspection where there is cigarette burns on the seat, a spot of rust, dints, mechanical history.. all photo's are taken and everything is reported. These guys have no reason to lie like an import yard does.. they are not making a huge profit from selling you a dud.. they get paid a set amount to get you the best car for your money. :D

What do you think import yards do? Buy the cars locally? No.. they get them in from Japan and make anywhere from $3,000 to $15,000 per car.. I'd rather keep that money for myself thanks! :(

Second.. I agree, a lot of cars do come out of Japan which have had a haircut. Saying most or all is very extreme.

It's highly believable to receive cars up to 10 years old with 60,000km's because most of them drive their cars a couple of km's to work and back every day. Japan is a very different place geographically compared to Australia, mainly due to population reasons.

I have a friend who lives in the inner city (not in the suburbs) and he puts about 5,000km's a year on his BMW.. he works in the city, lives in the city.. plays in the city. Most Japanese are like this from my understanding.

Link to comment
https://www.sau.com.au/forums/topic/24851-r33-gtr-price/#findComment-530469
Share on other sites

Apologies for not stating myself properly....i too believe firmly believe that import agents would have substantially more experience in vehicle inspection than the average joe(me).

The point i wish to express is that nothing exudes more confidence and assurance than having seen and inspected the car in the flesh.

Yes i have seen inspection reports and must admit that they are resonably concise, but the problem is that everyone generates different expections from simply viewing pics of the car alone, and some are dissappointed when the actual car does not meet those expections.

In this case here perhaps i should probably explicitly define that term "risk" as used in my previous thread, as the chance of ending up unhappy with your purchase. (im pretty sure this "risk" would then be higher when purchasing a car through an agent...a car u have not seen before... compared to purchasing it locally)

Personally, i would rank the following purchase methods in the following order: Private local owner, import agent, import yard (i think they are mostly rip offs too)

Finally, after some consideration of your input, i do admit that saying all or most of the imports have been clocked is a little extreme...but many of the imports i've seen are in conditions that are unlikely to match the stated mileage...perhaps this should be viewed on a case by case basis i guess, since owner care plays a large part in the condition of the car.

Link to comment
https://www.sau.com.au/forums/topic/24851-r33-gtr-price/#findComment-530524
Share on other sites

Some very valid points guys - there have been a lot of cases where sellers do get desperate and sacrifice their GTR's or other models for very low prices. When this happens it also leads some to believe that cars such as the R33 GTR are worth less than they really are. Thats my feeling anyway

Link to comment
https://www.sau.com.au/forums/topic/24851-r33-gtr-price/#findComment-530915
Share on other sites

Yeah, I may be in the market for one soon. I was originally looking at getting an R32, but the price differential isn't so great these days (for reasons noted above). I don't think such cars should ever be offered so cheap as it takes away a lot of exclusivity and quite simply, the car deserves to go for more, but time always catches up with everything. Only catch is the insurance though...that might ultimately kill the idea for me. I may move to a nicer suburb so I can insure it for a planet earth price, hehe (I want to move anyway). I've owned a couple of other hipo imports from the other stables (and sold them to buy a cheap runabout for the meantime) and it might be time to step up to the R33 GTR experience soon (despite my user name, hehe). It will feel pretty strange driving something so big again though (my current car is tiny), but I do feel safer when I drive something nice and solid...

Link to comment
https://www.sau.com.au/forums/topic/24851-r33-gtr-price/#findComment-531095
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
×
×
  • Create New...