Jump to content
SAU Community

?

soopamarcus

By soopamarcus,
in New South Wales

 Share

Recommended Posts

400HP Experienced

400HP

Posted
Posted

Marcus.... dunno about Mobil R but many friends use Mobil 1.... Motul is used by many places including UAS.... oh and I forgot.. NISMO use it as well...

those are both fine. For more exp stuff you can try Royal Purple which is sold at C&V. I have Hytech (or however you spell it) which is the standard oil used by Hill Motorsports (where i got my car serviced) and also C&V use this.

I think any of the above will be fine for your car... you jsut need to find out what grade... maybe 10W40? not sure.

But definitely run a search man...

If you are gonna get a service go to Hills motorsports... or gie me a call I can talk to you about it

Cheers

Link to comment
https://www.sau.com.au/forums/topic/2497--/#findComment-45876
Share on other sites
soopamarcus Enthusiast

soopamarcus

Posted
  • Author
Posted

Hey 400, yeah i jsut went to powerplay imports to get motul 4100

its semi synthetic rated at 10W 40.

I cant report any noticeable differences yet.. but we'll see when i make the next oil change in 5000K's...ill let ya know how burnt it is...

hey yang if u get this msg..call me thurs or fri nite just to confirm it all..thankx

oh yeah forgot..i am m'sian chinese...are you?

oh and i agree...C&V are on the steep end of the market..but i spose they know what they are up to..

mc

:shake:

Link to comment
https://www.sau.com.au/forums/topic/2497--/#findComment-46506
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...