Jump to content
SAU Community

Recommended Posts

Im pretty new to these things, however was enquiring for a cousin of mine who does regular track days.

What we are after is a Cheap GPS lap timer - and not the kind used on the mobile phones. Have heard that the Driftbox is an option but im a bit skeptical - is there any other options that are around the price of the driftbox that have similar functions?

Hopefully you can help out!!

Regards

Kim

Link to comment
https://www.sau.com.au/forums/topic/250329-gps-timers/
Share on other sites

does it have to be a GPS timer??

They are known to have very varring results.

We use Ultra lap timers which are available on Ebay at a very good price. They use a beacon and receiver and we've proven them to be within .01 seconds to the actual dorian timing at various circuits.

Link to comment
https://www.sau.com.au/forums/topic/250329-gps-timers/#findComment-4337656
Share on other sites

I have an Ultra lap timer for my kart and works great..

my car however i will be giving my N95 8gb a go for gps timing with www.racechrono.com on it. i did also buy an external bluetooth receiver for it. apparently alot more accurate than the internal phone item..

the software people are making for racechrono is great i'm pretty happy with it. and most of all its Free :banana: tho i think they deserve a little donation soon!

I'm doing a track day in march i will give both a go against the timing at ec also and see what the difference is.

Link to comment
https://www.sau.com.au/forums/topic/250329-gps-timers/#findComment-4337749
Share on other sites

Care to elaborate?

It's accuracy is only as good as how it's measured, and with a GPS-based unit it's not particularly good.

Firstly, it depends on how fast the GPS unit refreshes its position. Most commercial GPS units (the ones built into satnav units and Bluetooth GPS receivers) refresh at approximately 1Hz (i.e. once a second). That means it only checks to see where you are once a second, so it can only be completely accurate to the second.

While that's good enough if you're trying to use it for tooling around town trying to work out how to get to the shops, on the track a second is a f**kload of distance and pretty much useless for measuring. In terms of accuracy, you may as well use a stopwatch taped to your steering wheel.

RaceLogic's two GPS timers (PerformanceBox and Driftbox) refresh at 10Hz. While that's better, it's still only really accurate to a tenth of a second.

They can apply formulae to interpolate values if you crossing the lap marker happens to fall somewhere between refreshes, but that's going to be a guess rather than an measured value.

Secondly, there's the accuracy of the receiver as well. If you have a read of the Wiki entry on GPS, you can see there's more information on how accurate GPS can be / is in practice than I can be bothered reading, let alone summarising. In short, there's plenty of scope for error.

I know that when I've taken my car for a spirited drive on a winding country road, my satnav unit has confidently told me that I was in a river or a field rather than the road I was actually on. That's without trees or buildings on a cloudless day with a reported 5 satellite connection, so interference was minimal.

Your traditional lap timer uses an infra-red beacon somewhere on the track, with a receiver in the car. Every time you go past the beacon (that is projecting in an approximately straight beam) the receiver marks a lap. Since the receiver reacts quite quickly as soon as the IR beam goes into it, it's a lot more accurate. It always measures in the same place, so the distance of a lap is constant rather than slightly variable due to the aforementioned refresh rate.

Edited by scathing
Link to comment
https://www.sau.com.au/forums/topic/250329-gps-timers/#findComment-4352083
Share on other sites

I do see your point and a good post there. Update rate of the GPS is only part of the story as far as timing goes. You have a dead reckoning algorithm based on speed, heading and acceleration to further reduce timing errors. It's a personal preference and I'm not in any way saying one is better than the other. For track days though I would think timing accurate to 0.1s is more than enough.

I guess the attraction of the GPS lap timers is the ability to log the whole lap, show sector times etc.

Link to comment
https://www.sau.com.au/forums/topic/250329-gps-timers/#findComment-4352540
Share on other sites

You have a dead reckoning algorithm based on speed, heading and acceleration to further reduce timing errors.

But that's just a guess. An educated guess, but a guess nonetheless.

With a beacon timer there's no running a "close enough" measured number through a series of equations to make it "closer enough". What you measured (i.e. what your timer observes in the real world) is what is true, or as true as the hardware can measure.

It's a personal preference and I'm not in any way saying one is better than the other. For track days though I would think timing accurate to 0.1s is more than enough.

That I'd agree with. Most people doing random track days in their daily driver street cars would struggle to be so consistent that hundredths matter.

I'm looking at getting a Driftbox eventually so I can log my line through a whole lap. I want to be able to overlay my lines onto a map to see how consistently wrong I am at them and how, as well as measuring sector times without having to buy an expensive timer and multiple beacons.

I definitely won't be getting one of those phone-based GPS timers, given their inaccuracy.

Link to comment
https://www.sau.com.au/forums/topic/250329-gps-timers/#findComment-4354397
Share on other sites

Hey,

Just curious about this discussion, there are 5Hz external GPS receivers around, such as:

http://cgi.ebay.ca/NEW-Solar-Bluetooth-Gps...%3A1|240%3A1318

And the:

http://www8.garmin.com/products/gps16a/spec.html

Although obviously they cost a bit more, would that change your mind on GPS based timers at all? Or is every 200ms not accurate enough still?

Also, I haven't confirmed that phone based software would be fast enough to keep up with updates every 200ms, I'm just curious about this :P

Link to comment
https://www.sau.com.au/forums/topic/250329-gps-timers/#findComment-4359186
Share on other sites

  • 3 weeks later...

yeah I run the 5mhz receiver with the race chrono software and its great. very simple setup to give you good info like any lap vs best lap info which lets you see how mid corner speed affects your lap time.

I am just moving to a full data logging setup but that is ina racecar. for weekend use a 5mhz receiver and race chrono is excellent. and they have all nsw tracks now too, I submitted OP and WP they already had EC.

Link to comment
https://www.sau.com.au/forums/topic/250329-gps-timers/#findComment-4398782
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...