Jump to content
SAU Community

Sydney To Melb In The New Car!

chef_stagea

By chef_stagea,
in South Australia

 Share

Recommended Posts

AFTDRK Rising Star

AFTDRK

Posted
Posted

I Drove my old 33 and my gf's VW Polo (two seperate occasions) back from Sydney

i was a little worried about kangaroos but on both occasions i didnt manage to encounter any (that were alive anyway)

its not such a bad trip in my experience, the first time back in my old 33 i drove it straight only stopping for fuel and the occasional light meal

second time in the vw i took a few hours rest half way through the journey. both times i relied quite heavily on my gps and it got me through :(

Iron Chef Grand Master

Iron Chef

Posted
Posted
Yeah cos you wouldn't want to enjoy it.

Were you one of those kids that kept all his action figures in the boxes and never had any fun with them.

Perhaps you could drive your Magna more often and keep it real for both of us??

Or maybe offer to pay for a new Nismo LM-GT4 rim or Nismo front bar when either of them get smashed in a pothole out on the Hay Plain?

I would hardly call 18 boring hours of long-haul driving enjoying your car. Dodging roos, nearly falling asleep at the wheel, avoiding crazy drug induced truck drivers, being done for speeding, getting stuck behind losers doing 90km/h in a 110km/h zone, getting robbed of your hard-earned buying very dodgy food at truck stops ....

Taking a car for a belt in the hills or around Mallala is, however.

Not quite the same IMHO.

Highlighted for truth - copped a one month licence suspension and $400 fine (and this is going back a few years ago) for a road trip in a hire car to Melbourne. We did the return trip in a day and still went out clubbing when we got back. You can imagine the look on the faces of the blokes at the rental company when they took the odometer reading haha.

Aside from the lack of cruise control, a Stagea is a brilliant car for interstate trips.

Import S13 Veteran

Import S13

Posted
Posted
soooo, what car did you get :P
I think one of 18 ever built and no airconditioning was a good enough excuse to get it transported rather than drive it from Brisbane :D
Perhaps you could drive your Magna more often and keep it real for both of us??

Or maybe offer to pay for a new Nismo LM-GT4 rim or Nismo front bar when either of them get smashed in a pothole out on the Hay Plain?

i asked what the car was and noone said anything but because iron chef has given away some clues, im pretty sure i now know what it is :D

good buy chef stag, nice choice :(

kralster Veteran

kralster

Posted
Posted
Perhaps you could drive your Magna more often and keep it real for both of us??

Or maybe offer to pay for a new Nismo LM-GT4 rim or Nismo front bar when either of them get smashed in a pothole out on the Hay Plain?

Highlighted for truth - copped a one month licence suspension and $400 fine (and this is going back a few years ago) for a road trip in a hire car to Melbourne. We did the return trip in a day and still went out clubbing when we got back. You can imagine the look on the faces of the blokes at the rental company when they took the odometer reading haha.

Aside from the lack of cruise control, a Stagea is a brilliant car for interstate trips.

Maybe you could slip in the shower and brake your neck, better never shower again.

I could keep it real on my motorcyle that gets to 270 km in 18 seconds if i feel like it.

Import S13 Veteran

Import S13

Posted
Posted
Sorry Kye didn't realise the original question was directed at me (someone posted in between...)

haha dont worry buddy. i spent ages looking around trying to find out what it was when all i had to do was check his topics haha :)

dangerman4 Mentor

dangerman4

Posted
Posted

i purchased my quad frame from newcastle and the zx10 engine from near sydney airport.

i took my mate and drove Adelaide, Sydney, Newcastle, Adelaide , only stopping for fuel / servo food.

3200 klm in 36 hours, but i must admit there was a few No Dose taken on the return trip.

we had certain time retraints is the only reason we attempted such a feet, and would have been home sooner

if the NSW police force hadnt held us up for 2 hrs thinking we were drug smugglers.

the amunition and 2 x 14 inch hunting knifes in the car didnt help either.

chef_stagea Grand Master

chef_stagea

Posted
  • Author
Posted
Guessing this is the stag i saw you in on glynburn rd yesterday? Had to look twice to see if it was you, harder to recognise without gold wheels. Looks very tidy

no mate thats the same one stock as a rock, wait to c whats comming :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      7 Speed Auto transmission fluid change (Skyline, Q50, Q60, Fuga, Q70, A62 Titan and probably heaps of others including Navara...)

      By Duncan · Posted

      I thought I'd do a write up on an auto transmission fluid change for a the nissan 7 speed Automatic. At some stage the genius engineers decided that the fluid in the trans was "for the life of the transmission", (which seems kind of self supporting to me) and removed the dip stick and fill tube (funnily enough there is still a casting for it). Anyway, for this job you do need 2 specialist tools in addition to regular hand tools, jack and good chassis stands. You need a way to pump fluid up to the transmission; I got one of these but there are plenty of other options: https://www.ebay.com.au/itm/364584087070 Don't trust the generic listing though, it does not come with the required adapter for the Nissan 7 Speed. You need one of these, can't do the job without it: https://navarapart.com.au/product/genuine-nissan-patrol-y62-d23-np300-navara-re7-dipstick-fill-connector1 You need a heap of compatible transmission oil. Could be Nissan, could be anything else rated for Nissan Matic S. You need at least 10 litres, I had 15 to give it a better flush... Also, you need some biiig oil catch trays, at least one of these, or bigger if possible (volume was fine, size was very marginal): https://autobarn.com.au/ab/Autobarn-Category/Tools-%26-Garage/Specialty-Tools/Oil-Service/Garage-Tough-Oil-Drain-Pan-Black-16L---GT1068/p/TO03191 Finally, a measuring jug is very useful if your pump does not have volumes marked on it, I got a 6l one: https://www.repco.com.au/oils-fluids/fluid-accessories/measuring-jugs/penrite-measuring-jug-6l-pmj006/p/A5322648 Oh, and gloves.....this stuff is horrible (not as bad as diff oil, but getting there) ....First, jack up your car.....
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
    • GTSBoy
      R33 persistent issues. P/steering and lag/misfire

      By GTSBoy · Posted

      What are we supposed to be seeing in the photo of the steering angle sensor? The outer housing doesn't turn, right? All the action is on the inside. The real test here is whether or not your car has had the steering put back together by a butcher. When the steering is centred (and we're not caring about the wheel too much here, we're talking about the front wheels, parallel, facing front) then you should have an absolutely even number of turns from centre to left lock and centre to right lock. If there is any difference at all then perhaps the thing has been put back together wrongly, either the steering wheel put on one spline (or more!) off, and the alignment bodged to straighteb the wheel, or the opposite where something silly was done underneath and the wheel put back on crooked to compensate. Nut there isn't actually much evidence that you have such a problem anyway. It is something you can easily measure and test for to find out though. My money is still on the HICAS CU not driving the PS solenoid with the proper PWM signal required to lighten the load at lower speed. If it were me, I would be putting either a multimeter or oscilloscope onto the solenoid terminals and taking it for a drive, looking for the voltage to change. The PWM signal is 0v, 12V, 0V, 12v with ...obviously...modulated pulse width. You should see that as an average voltage somewhere between 0V and 12V, and it should vary with speed. An handheld oscilloscope would be the better tool for this, because they are definitely good enough but there's no telling if any cheap shit multimeter that people have lying around are good enough. You can also directly interfere with the solenoid. If you wire up a little voltage divider with variable resistor on it, and hook the PS solenoid direct to 12V through that, you can manually adjust the voltage to the solenoid and you should be able to make it go ligheter and heavier. If you cannot, then the problem is either the solenoid itself dead, or your description of the steering being "tight" (which I have just been assuming you mean "heavy") could be that you have a mechanical problem in the steering and there is heaps of resistance to movement.
    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      Little update  I have shimmed the solenoid on the rack today following Keep it Reets video on YouTube. However my steering is still tight. I have this showing on Nisscan, my steering angle sensor was the closest to 0 degrees (I could get it to 0 degrees by small little tweaks, but the angle was way off centre? I can't figure this out for the life of me. I get no faults through Nisscan. 
×
×
  • Create New...