Jump to content
SAU Community

Recommended Posts

Hey all,

Got the following for sale out of a R33 GTR, parts have approx 6,000kms on them. I bought a GTR with low comp and I have no need for these parts.

264 tomei cams with tomie cam gears $1000

Sard 650cc injectors (dark blue) with standard fuel rail (no reg) $650

Apexi N1 split dumps, Apexi N1 front pipe, and a unknown Decat $600 for the lot

Also have a pair of brand new 6boost low mount RB26 manifolds $1200

PM if your interested..

Cheers,

J

Will get some pics up soon.. would rather sell them together for now. unlesss someones keen on the front pipes by themselves..?

I'll confirm the pipe sizing tonight..

I will seperate the cams and gears, $800 for cams, $220 for gears.. they only have 6000kms on them.

Cheers

Johno

I'll take the front pipes if BWRGTR just wants the dumps. Diameter? i'm after 70mm x 2 into 80mm joiner.

sounds good :D

johno could u also confirm diameter of the dumps if possible and if it will bolt-on to hks gt-ss turbos??

does the split get in the way as i have read others need to gind it etc :bunny: thanks

No probs, will confirm pipe sizing tonight..

They are currently on standard turbo's so if the exhaust housing is the same as a gt-ss (im pretty sure they are) they will fit.

The wastegates do not hit the inner wall if thats what you mean.. and they fit up perfectly. I will take a few pics fitted up to the turbo's..

Cheers,

No probs, will confirm pipe sizing tonight..

They are currently on standard turbo's so if the exhaust housing is the same as a gt-ss (im pretty sure they are) they will fit.

The wastegates do not hit the inner wall if thats what you mean.. and they fit up perfectly. I will take a few pics fitted up to the turbo's..

Cheers,

ok,

Cams part number is A2691N

Cam Gears sold...

Front pipe, inlets 6.3cm, outlet 7.5cm give or take a few mms..

Dump pipe outlet is 6.3cm

pics of 6boost manifolds... They are low mount, internal gated, they retain the stock turbo position and have the 6boost lifetime warranty against cracking!

264 tomei cams with tomie cam gears $SOLD

Sard 650cc injectors (dark blue) with standard fuel rail (no reg) $SOLD Pending Payment..

Apexi N1 split dumps $SOLD,

Apexi N1 front pipe, and a unknown Decat $300

brand new 6boost low mount RB26 manifolds $1200

Cheers,

Johno

Hi Mate

wondering if the injectors are sold??

Cheers

anthony

264 tomei cams with tomie cam gears $SOLD

Sard 650cc injectors (dark blue) with standard fuel rail (no reg) $SOLD Pending Payment..

Apexi N1 split dumps $SOLD,

Apexi N1 front pipe, and a unknown Decat $300

brand new 6boost low mount RB26 manifolds $1200

Cheers,

Johno

Hey mate,

They are sold pending payment, the buyer contacted me yesterday saying he will be paying soon. If he falls through I'll send you a PM

Cheers

Johno

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Jack the back of the car up, pull that wheel off, pull that sensor out, and put a bore scope into the hole to inspect the outer casing, see if anything looks damaged before you pull the whole thing apart.
    • Ergh... So I pulled the speed sensor out again and the tip was shiny so I think it's rubbing the bearing. The bearing contains the magnets for the speed sensor so I think when the first sensor broke it damaged the magnet ring on the bearing.  This is just a Google image, but there is a hole going to the bearing. So when the tip broke off the old sensor I'm guessing it fouled the bearing... As the magnet is only protected by a plastic cover it would be easy to damage it. So I guess I'm doing a bearing again.   
    • My thinking is that if the O2 sensor is shot then your entire above described experience is pure placebo.
    • Here is the mess that I made. That filler there was successful in filling dents in that area. But in the middle area. I can feel dents. And I've gone ocer it multiple times with filler. And the filler is no longer there because i accidently sanded it away. I've chased my tail on this job but this is something else lol. So I'm gonna attempt filler one more time and if it doesn't work I'll just high fill primer the door and see where the issues are because guidecoat is of no use atm.
    • Ok, so I think I sort of figured out where I went wrong. So I definitely overthinked it, and I over sanded, which is probably a large part of the problem. to fix it, I ended up tapping some spots that were likely to be high, made them low, filled them in, and I tackled small sections at a time, and it feels a lot better.    I think what confused me as well is you have the bare metal, and some spots darker and some are lighter, and when I run my finger across it, it' would feel like it's a low spot, but I think it's just a transition in different texture from metal to body filler.    When your finger's sliding on the body filler, and crosses over to the bare metal, going back and forth, it feels like it's a low spot. So I kept putting filler there and sanding, but I think it was just a transition in texture, nothing to do with the low or high spot. But the panel's feels a lot better, and I'm just going to end up priming it, and then I'll block it after with guide coat.   Ended up wasting just about all of my filler on this damn door lol  
×
×
  • Create New...