Jump to content
SAU Community

Recommended Posts

plug ok? check and clean.

other wise get a multi meter and check for a curcuit on the wires that come to coil 6. if open curcuit then you have cut or problem in the wires

Yer the plug is ok not dirty or anything & i swappd it when i swapped the coil pack 2 make sure..yer il chek the wireing thanks..coud it b the injector? Prob not cos it come up with ignition system fault code but u never kno sometimes

Link to comment
https://www.sau.com.au/forums/topic/254665-runnen-on-5/#findComment-4396526
Share on other sites

if you had a noid light handy you could check the pulse.

feel if its ticking. unplug when running and listen for a change

Yer i hav checkd & have power going tru the coil on that cylinder same as all the others..i dont hav a noid light 2 check injector pulse n i cant really tell if its ticking jus by touching it & if i unplug it will jus b the same as unplugging the coil..missfire...coud it b something bad like burnt valve or something?..-but i dont think a injector problem or burnt valve wood log an ignition system code..or wood it?

Link to comment
https://www.sau.com.au/forums/topic/254665-runnen-on-5/#findComment-4399433
Share on other sites

Yer i hav checkd & have power going tru the coil on that cylinder same as all the others..i dont hav a noid light 2 check injector pulse n i cant really tell if its ticking jus by touching it & if i unplug it will jus b the same as unplugging the coil..missfire...coud it b something bad like burnt valve or something?..-but i dont think a injector problem or burnt valve wood log an ignition system code..or wood it?

Ar its ok dont panic the computer jus wasnt plugged in properly!dont kno why that make just no6 go bad ok thankr

Link to comment
https://www.sau.com.au/forums/topic/254665-runnen-on-5/#findComment-4399513
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
×
×
  • Create New...