Jump to content
SAU Community

Westies Mini Meet And Greet Every First Thursdays Of Each Month


Recommended Posts

Hey Guys - this is for all the WESTIES car enthusiast (all welcome even you're not from west lol)

We will have a mini meet and greet every thursday night starting 5th of March. We will do this every first thursday of each month. We will officially start it next month on the 5th. We have started it with all Little Pinkyz group last 12th of Feb.

WE WILL ALL HAVE DINNER!!!!!! and CHAT!!!!!!!!! and a bit of CRUISING!!!!!!!!!

So guys every1 is invited

I will be using this template for where to meet and destination

Where to meet: JUST Check the thread (we will update this every month we will always change the place)

What time: 9.30 to 10.00 pm Time will never change

Destination: (Will Post before the meeting day)

What to bring: YOU AND YOUR RIDE LOL and MONEY and a hungry tummy LOL :) !!!!

Alright People

First official mini meet and greet date

Where to meet: KKs Liverpool middle parking

Time: 9.30 to 10.00 pm

Destination: Mini cruise to and dinner to Rashays Restaurant at Livo or Kebab shop at Carens hill or Ctown KKs lol(next to the bowling lane)

See you there :)

haahha you finally did it!!

cya every month then :blush: except if i have exams o.o

Yeh lol..... Well see you every first thursday man :D unless you guys still wanna meet up in between lol

Keep this post alive guys lol

The last time we held a mini meet for all westies only 4 cars came From SAU :laugh:

Shane

Mitch

Shehan

and ME :)

even the first SAU mini meet only 2 came :laugh:

Me:)

and Shehan

Anyway hope to see more people on the 5th

Looks like all active members or members are from up norht :thumbsup:

Alright People we changed the place and destination

and Also it will be every month not every thursdays anymore :( just too less people turning up we might do it every saturday night

First official mini meet and greet date

Where to meet: North Parra Maccas

Time: 9.30 to 10.00 pm

Destination: Nandos Parra

hey guys, ill be out of these meets. training finishes close to 9 and i am to tired to go drivin round. also a bit late, i have work in the morning.

I will try and get to them now and then



  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...