Jump to content
SAU Community

Recommended Posts

Hello everyone,

Just putting the word out :- there is a new form of motor sport starting close to Adelaide in the near future, with a track currently being built at Dutton aprox 85 km from the cbd . If you haven't heard of Dirt circuit, it is the cheapest form of organised motor sport in S.A and also one of the largest with over 300 cars competeing. Dirtcircuit is a truly unique sport which combines elements from many motor sports :- the sideways action of drift, speedway & rally, the straight line speed of the drags and the driving techniques of circuit racing. There are currently 9 specially constructed dirt circuit tracks in regonal South Australia that range in length from 700m to 1000m. Features of the tracks include chicanes, hairpins, sweepers, long and short straights ect... . Track layouts allow most cars to hit top speeds of between 140-200 kph. Tracks are constructed of clay, limestone or an oil impregnated surface. . Racing is run with up to 10 cars competing in 6 lap sprint races, in both directions. Every driver participates in 5 races per meeting including a 10 lap allcomers race. In all classes there is a aprox 30+ races per meeting. Due to the racing format a car can have two drivers, which halves the cost of racing if you build a car with a mate. Kids as young as 10 can drive in restricted childerens races.

The classes are as follows :-

Standard class :- HQ shape holdens, early falcons up to 202 ci. No mods allowed.

New standard class :- VN -VT and equivelant falcons. No mods allowed ( Cars can be built for $1000 or less in this class )

Street stock :- Carby cars up to 265 ci, valiants, falcons, commodores ect.. . Mods:- 350 cfm carbies, aftermarket cams and extractors, original engine position and no fibre glass panels.

Modified saloon :- Anything goes in this class :- Steel bodied cars , space frames, fibre glass bodys, standard, mid or rear mounted engines, turbos, blowers, injection, any vehicle engine combo eg :- 400 ci chev mid mounted in a Datsun 180 B ( don't laugh there are a few v8 powerded datsuns out there ). Cars in this class range from cheap wrecking yard racers to 600+ hp ,supercharged, spaced framed sedans and yes the 100 hp cars do occasionally battle it out in the same race with the 600hp cars. This class caters for all budgets again a car could bee built for less than $1000.

Open wheelers :- Again anything goes. No restrictions on engines, running gear ect.. . This class allows you to build a unique chassis / race car of your own design. Many cars run mid mounted V8s, auto transmissions, 9" diff or irs. There are now alot of turbo jap cars being built to give the v8's a run for thier money. These cars normally weigh between 600kg - 1000kg, so even with a standard engine you can achieve a great power to weight ratio. Its not unheard of for people to build cars exceeding a v8 supercar power to weight ratio for much less than $10k.

Here the best part, subs for the year costs only $20-00 per driver, there is a $10 nomination fee for each race meeting and we don't charge an arm or a leg to spectate :- Adults entery fee is only $5-00 at the gate . There will be a total of nine race meetings a year at the new club, but if you have the time you could race every weekend at any of the other 9 tracks. Each year there are 2 rounds of the State championships which is rotated between clubs.

If any one in the Metro area is interested in racing dirt circuit, we can volunteer experienced drivers to help you build a car and even source cheap materials and parts to get you out on the track. If you want any other information please call Matt on 0447739992 or email [email protected] . There will be a free open day at the track in July for all those that are interested. We should have a good mixture of all types of cars racing and on display. I will put another post up when I have a firm date for the open day.

Cheers Matt Stirling

Here a few pictures :-

DSC_0020.jpg

130.jpg

DSC_0037.jpg

052StreetStocks.jpg

DSC_0040.jpg

ptWhyallaPits017.jpg

DSC_0041.jpg

owWhyalla-Racing139.jpg

dWhyallaPractise017.jpg

ptWhyallaPits039.jpg

DSC_0058.jpg

modsPtLincoln021.jpg

DSC_0069.jpg

1Whyalla001640x480.jpg

DSC_0077.jpg

DSC_0081.jpg

Whyalla011640x480.jpg

DSC_0121_edited.jpg

Picture380.jpg

Picture246.jpg

DSC_0123_edited.jpg

Picture002.jpg

DSC_0163_edited.jpg

Picture270.jpg

Picture296.jpg

Picture282.jpg

modscropptlincoln029.jpg

modsPtLincoln027.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...