Jump to content
SAU Community

Recommended Posts

Hi All,

Advertising this on behalf of my brother.

1996 EF Series 2 Gli Wagon

4l 6 cylinder

Column Auto

6 seater (front bench seat)

Dual Airbags (Driver and Passenger)

255,000kms

Towbar

Good tyres all round

Full service History

New Panasonic CD Head Unit

In the last 2 years, this car has had the following maintenance performed:

New Head

New Headgasket, bolts etc.

New Radiator

All new cooling hoses

New Thermostat

New Fuel injectors

New Serpentine belt

New Alternator

New (reconditioned) Auto gearbox and torque converter

New Starter motor

New Neutral/Park switch

New Exhaust

New Hubcaps

My brother purchased this car to register and use as a daily, and while it would have been a perfect cheap daily, he's just bought one of my cars instead, so this is now up for sale.

Mechanically, this car is practically perfect and runs and drives faultlessly. It is very quiet and tight to drive. The engine is unusually smooth and quiet and even idles nicely! The only mechanical fault I can find is that the front brake rotors need to be machines/replaced as they do shudder a fair bit.

The interior is very clean and solid. Headlining is saggy, but it has been pinned back up, so isn't noticeable unless you look up!

Externally, the car is tidy, and looks quite respectable, but like any car this age, it does have the usual bumps, scratches and dings. Again it's not too bad and does look respectable, but it aint perfect. A quick cut and polish should get rid of most of the scratches and scuffs. There is also a section on the bootlid where the paint is starting to crack.

No rego, but does have approximately 14 days left on a Vicroads permit so can be driven to and from place of purchase, and for repairs, rwc etc.

He's after $1200 firm for it, inspection is available in Cheltenham.

Please post or PM for any questions.

Thanks,

Justin.

07032009379.jpg

07032009377.jpg

07032009365.jpg

07032009363.jpg

07032009376.jpg

07032009375.jpg

07032009380.jpg

07032009358.jpg

07032009359.jpg

07032009373.jpg

07032009374.jpg

07032009368.jpg

07032009369.jpg

07032009367.jpg

07032009378.jpg

Depending on day, I may also be able to get the car to Reservoir for viewing for any genuinely interested parties. Cheltenham is where the car is located though, and is the preference for viewing.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...