Jump to content
SAU Community

Inner West Crew Whoretown (toowong/st Lucia/kenmore/indooroopilly And Sometimes Sunnybank?)


Recommended Posts

BDO tickets should be on there way to me now..

Ohhhh. Thats why that explains the long queue along Adelaide Street this morning... Whats BDO anyway. The queue looks ridicules. It starts from somewhere around Boost next to Egames and stretch all the way around the building, along Adelaide Street to LV...

Ohhhh. Thats why that explains the long queue along Adelaide Street this morning... Whats BDO anyway. The queue looks ridicules. It starts from somewhere around Boost next to Egames and stretch all the way around the building, along Adelaide Street to LV...

Big Day Out :mrt:

mine faces the opposite direction tbf. I'm doing my part. Well looks like I won't be going to BDO if tickets are gone already lol. Meh only 2 bands I really wanted to see. Anyone know if any bands are going to be doing any other shows while they're here?

mine faces the opposite direction tbf. I'm doing my part. Well looks like I won't be going to BDO if tickets are gone already lol. Meh only 2 bands I really wanted to see. Anyone know if any bands are going to be doing any other shows while they're here?

There will be a second relese

hai

Well hallooo thar

You are so right!!

l_b2afac4f91a97b3606c110f9c27c401b.jpg

l_26beeeadc0fcf2b1edc6600c4ecfd6c0.jpg

l_3b9fb3ecd1fa8fbb19a643c84bb17680.jpg

l_11297bf5e886382bf829ead9264b222c.jpg

l_1463360fec19f0831d2913bcca658be8.jpg

l_2e8957353b6c6574d53e9434a739c5e9.jpg

l_079e62a2cd9b8c3bd961887d9050aafb.jpg

l_464becc3785942678668168fe70fca7a.jpg

l_57dfcbd50ca4f304c897e7642d02ddd5.jpg

*FAP*. Nice Job! Needs bigger pics but...

mine faces the opposite direction tbf. I'm doing my part. Well looks like I won't be going to BDO if tickets are gone already lol. Meh only 2 bands I really wanted to see. Anyone know if any bands are going to be doing any other shows while they're here?

Yeah true, I had gotten used to distinguishing your posts from brandons, but now danski comes in and I keep thinking he is brandon :mrt:

hai

Oh hai

f**k you all, now colin, brandon AND danskis avatars all look the same

I'm used to colin's and brandon's now. And I don't confuse dans, because his is the best model :mrt:

*FAP*. Nice Job! Needs bigger pics but...

That's as big as they get sorry :)

I'm used to colin's and brandon's now. And I don't confuse dans, because his is the best model ;)

;)

We just went for a drive so my mrs could take some pics of the car :( Ill change my avatar so no1 get confused anymore :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
×
×
  • Create New...