Jump to content
SAU Community

Inner West Crew Whoretown (toowong/st Lucia/kenmore/indooroopilly And Sometimes Sunnybank?)


Recommended Posts

Isola you putting a remote start alarm system on your car ? If so, do you know where the relay is so that the car doesn't start in gear ?

*end serious note back to reality*

oh look a duck.

It's the reverse switch that is faulty apparently... telling me the gearbox has to be dropped to replace it (bs)

Unless theres something retarded about GT-R boxes (possible), that is complete BS. It's easy to replace. See if you can find a replacement switch and we'll do it when we do the AWD fluid while the car is up on stands.

The brake light problem seems to be intermittent. Sometimes all four light up and the spoiler, sometimes the two centers lights up plus the spoiler, and sometimes just the two centers on their own.

Intermittant faults are always fun. Might have to take it to a more competant auto elec for that one :(

The alarm doesn't go off when the boot/bonnet/or doors are opened (when armed)

This should be pretty easy to fix, assuming he has installed the bonnet switch. Do you know if it immobilises?

- and the turbo timer doesn't work one out of every ten times the car is turned off (usually when I really WANT it to turn on too).

I'd say this isn't a wiring fault, and might be something you just have to live with. The way turbo timers work, it detects the voltage drop to 0V on the IGN line, then picks it back up to 12V, HOPEFULLY before the engine stops running. Once every now and again (particurly with air con on) my engine slows down too much and fails to stay running when the turbo timer kicks in. You can see it has kicked in on the display but, and it keeps all the ignition lights on and sh*t, the engine just stalls. I imagine that a built in turbo timer in an alarm possibly has a slower switchover, making it more likely for the car to stall in this time. Do all your ignition lights and stuff come on? Does your fan keep running?

and yeah, we'll have to investigate further with the head unit, and see if we can work out what's what.

Yep, sounds like fun :D I hate car audio :)

First thing to try will be cutting that handbrake switch wire.

Make sure to get me to look at it BEFORE i start drinking :)

and get those 6x9s mounted before you come round :D

oh, and on the way home the steering seemed to lose power. so that's probably the pump. GRRRRR!

Could just be low on fluid/old fluid

Isola you putting a remote start alarm system on your car ? If so, do you know where the relay is so that the car doesn't start in gear ?

His isn't remote start, but such a relay would not be part of a manual car (they can start in gear) so it would have to be added when you install the alarm. Thus, it could be anywhere. Why do you ask, 2 dogs?

His isn't remote start, but such a relay would not be part of a manual car (they can start in gear) so it would have to be added when you install the alarm. Thus, it could be anywhere. Why do you ask, 2 dogs?

2 dogs ? Where ?

My relay seems to have died as I have a remote start on my car :D. Just wondered if it might be in a specific place.

Just like the gingers

We will rule the world one day.

LOL! No death is horrible enough for them

@Isola: Get your car back yet buddy?

:D

Going to go and pick it up shortly.

Really wish the idiots had have called me BEFORE they did any work though. Charging me $385 in labour because it took so long to try and track down a new unit for the fan... which they couldn't find, and wound up getting some holden unit, and that's another $80. If they had have just ASKED me, I would have said 'don't worry about it' bought one from the classifieds or wherever, and plugged it in myself. The fan wasn't even that much of an issue ffs.

Then they tell me a mechanic needs to do the reverse light. That my brake lights work fine (two witnesses say otherwise, as well as me braking outside a window at home every day) and that they've done nothing with the head unit or the alarm.

Not impressed. at all. Really pissed off would probably be a more appropriate description.

So don't anybody ever bother using Chermside Auto Electrical in Boothy Street at Kedron :)

Sounds like a piss poor effort. I wouldn't be giving them any money for that shit. You pay for them to work on the car not chase around finding parts. Complete and utter bullshit.

Damn, thats Terrible!

What do they reckon is wrong with the reverse lights? I can't see any reason a mechanic would have to look at it, its ALL wiring except for the reverse switch, which is a switch on the side of the gearbox that takes 2 minutes to replace. Sounds like they just CBF.

What is wrong with the brake lights exactly?

As for the alarm, I'd be figuring out exactly what it does and doesn't do, and get whoever installed it for you to fix it for free.

Head unit... yeah, I guess we'll have to look at that further

+1

Yea... Thats bs. I'm totally against people doing something without letting the owner know about it and then charging them for it. Its like "hey, your motor's f**ked and we swapped it with another 1 we have. That'll be 5 grand please." BS!

+1

It's the reverse switch that is faulty apparently... telling me the gearbox has to be dropped to replace it (bs)

The brake light problem seems to be intermittent. Sometimes all four light up and the spoiler, sometimes the two centers lights up plus the spoiler, and sometimes just the two centers on their own.

The alarm doesn't go off when the boot/bonnet/or doors are opened (when armed) - and the turbo timer doesn't work one out of every ten times the car is turned off (usually when I really WANT it to turn on too).

and yeah, we'll have to investigate further with the head unit, and see if we can work out what's what.

oh, and on the way home the steering seemed to lose power. so that's probably the pump. GRRRRR!

Need to find out if all those features have actually been wired up. I know when Dad and I installed the alarm n immobiliser on Terri's old car all we hooked up was the immobiliser and alarm for when the doors are opened. Didn't bother with the boot or bonnet. Could be the case here.

You don't usually make assumptions....

You know what happens when you make an assumption? You make an ass out of u and umption.

Unless theres something retarded about GT-R boxes (possible), that is complete BS. It's easy to replace. See if you can find a replacement switch and we'll do it when we do the AWD fluid while the car is up on stands.

Intermittant faults are always fun. Might have to take it to a more competant auto elec for that one :(

This should be pretty easy to fix, assuming he has installed the bonnet switch. Do you know if it immobilises?

I'd say this isn't a wiring fault, and might be something you just have to live with. The way turbo timers work, it detects the voltage drop to 0V on the IGN line, then picks it back up to 12V, HOPEFULLY before the engine stops running. Once every now and again (particurly with air con on) my engine slows down too much and fails to stay running when the turbo timer kicks in. You can see it has kicked in on the display but, and it keeps all the ignition lights on and sh*t, the engine just stalls. I imagine that a built in turbo timer in an alarm possibly has a slower switchover, making it more likely for the car to stall in this time. Do all your ignition lights and stuff come on? Does your fan keep running?

Yep, sounds like fun :) I hate car audio :D

First thing to try will be cutting that handbrake switch wire.

Make sure to get me to look at it BEFORE i start drinking :(

and get those 6x9s mounted before you come round :P

Could just be low on fluid/old fluid

His isn't remote start, but such a relay would not be part of a manual car (they can start in gear) so it would have to be added when you install the alarm. Thus, it could be anywhere. Why do you ask, 2 dogs?

Intermittent fault is probably dodgey wiring somewhere. I'd start at the back rip the lights off and have a look around in there. If there is any dodgey shit cut it out and solder in some new stuff. You will end up paying through the ass for an auto elec to find shit like that because they know they can slack off n just blame it on the fact that the problem could be anywhere.

+1 on check/change powersteering fluid.

Got rejected on that unit that I applied for. Epic gayness they didn't even bother calling my references. Going to have a look at another one at 3 today and another at 4 tomorrow. Hopefully I find something soon. I might have to start looking at share houses down here which I don't really want :S

Got rejected on that unit that I applied for. Epic gayness they didn't even bother calling my references. Going to have a look at another one at 3 today and another at 4 tomorrow. Hopefully I find something soon. I might have to start looking at share houses down here which I don't really want :S

Crash at Dan's place! You can even drive his 34 when he's not around. Hahaha

@ john - man thats bs, did these guys fit up the alarm too? id be asking questions and asking for the alarm to be fitted CORRECTLY

as for the reverse lights and audio - no idea man, but i do know that martin loves drinking :) hahahah hint hint

I didn't even know you'd met Donna :)

Thats what i thought! lmao lmao

If you like married women with some extra cushion ..... :)

Hey Collin, i will join your ginger ninja army! :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
    • hahah when youtube subscribers are faster than my updates here. Yes some vid from the day is up, here:  Note that as with all track day videos it is boring watching after the bloopers at the start.  The off was a genuine surprise to me, I've literally done a thousand laps around the place and I've never had instability there; basically it rolled into oversteer, slipped, gripped and spat me out. On the way off I mowed down one of the instructor's cones and it sat there all day looking at me with accusing cone eyes as I drove past. 1:13:20 was my fastest lap, and it was in the second session, 3rd lap.  It (or me!) got slower throughout the day as it got hotter.      
    • It sounds like you want what the Toyota Landcruisers have for their roof racks. Wanna know what you end up with? Rust holes in the roof, and water everywhere...
    • Discovered today that if I select reverse first and take my foot off the brake, then select drive, the drive indicator light works and so does the tiptronic gear indicator. 
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Does anyone here have any ideas?   Cheers guys
×
×
  • Create New...