Jump to content
SAU Community

Inner West Crew Whoretown (toowong/st Lucia/kenmore/indooroopilly And Sometimes Sunnybank?)


Recommended Posts

Piping engine mounts ect, and how do you graft the awd to the engine? the front diff is more or less in the sump so i imagine there would be some tricky work to be done there

My sump can be modified and used for the VG. I'll have to wait till Dan reads this to find out about mounts and piping, but he said that overall it's much of a muchness between doing the 25 and doing the VG.

Colin. I can NOT afford a VQ turbo. Plain and simple, I just bloody can't. Yes it might be more jizzworthy, but I simply cannot afford one, and am not throwing that much money into the 32.

Piping engine mounts ect, and how do you graft the awd to the engine? the front diff is more or less in the sump so i imagine there would be some tricky work to be done there

anything over 250awkw means broken diffs and gear boxes, and the gayest part about it is that there is no good aftermarket alternative so you just have to keep feeding it stock bits

That is gay. They must of solved this problem in the later models as there are a few of them running some pretty serious power with GT35rs n whatnot..

sif start talking about interesting stuff just as i have to go home

haha I know what you mean. I'm trying to get this shit finished before I leave but I just keep checking this thread lol :)

My sump can be modified and used for the VG. I'll have to wait till Dan reads this to find out about mounts and piping, but he said that overall it's much of a muchness between doing the 25 and doing the VG.

Colin. I can NOT afford a VQ turbo. Plain and simple, I just bloody can't. Yes it might be more jizzworthy, but I simply cannot afford one, and am not throwing that much money into the 32.

If all the stock stuff fits then you should be laughing. Fair enough if moneys tight. Do a VH instead :P

If all the stock stuff fits then you should be laughing. Fair enough if moneys tight. Do a VH instead :)

Yeah, by the sounds of it, that's MOSTLY the case. But I'll see what Dan says :P

Rego and insurance costs say no to VH :P

My sump can be modified and used for the VG. I'll have to wait till Dan reads this to find out about mounts and piping, but he said that overall it's much of a muchness between doing the 25 and doing the VG.

Colin. I can NOT afford a VQ turbo. Plain and simple, I just bloody can't. Yes it might be more jizzworthy, but I simply cannot afford one, and am not throwing that much money into the 32.

seriously though if money is an issue and you plan on selling it anyway...just get a r34 turbo and computer with the usual exhaust and stuff and make 300hp for much less

That is gay. They must of solved this problem in the later models as there are a few of them running some pretty serious power with GT35rs n whatnot..

nope, got worse, the active diff is very prone to breaking and the 6 speed box is pretty shit too! the guys with the 35Rs are the dudes i spoke to, one guy out at qr was on gearbox 3, rear diff 4 and front diff 3. Once they come up with a solution i might think about getting one!

seriously though if money is an issue and you plan on selling it anyway...just get a r34 turbo and computer with the usual exhaust and stuff and make 300hp for much less

I want to keep the 32 for track duties once I buy a 34. So I was thinking if it's got a 300hp motor sitting in it already, then I can play around adding more power once I've got a place to use it legally.

Money isn't so much an issue, it's more than I don't want to dump a fortune on power upgrades when I'm not using the power. I won't be using 500hp on the street, so I'm not going to use money I could be saving for my 34 to get it to 500hp.

seriously though if money is an issue and you plan on selling it anyway...just get a r34 turbo and computer with the usual exhaust and stuff and make 300hp for much less

nope, got worse, the active diff is very prone to breaking and the 6 speed box is pretty shit too! the guys with the 35Rs are the dudes i spoke to, one guy out at qr was on gearbox 3, rear diff 4 and front diff 3. Once they come up with a solution i might think about getting one!

that sounds shit lol. f**k that lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
    • Does the scanner do all the CUs in the car, or only the ECU?
    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
×
×
  • Create New...