Jump to content
SAU Community

Inner West Crew Whoretown (toowong/st Lucia/kenmore/indooroopilly And Sometimes Sunnybank?)


Recommended Posts

why would you take hem off? Just take them out with the engine?? and in that case they are just one bolt from the bottom, from my fuzzy memory anyway!

Yeah 1 bolt from the bottom, which sh*t is in the way of.

Seriously 10 seconds with a rattle gun and both are off an RB. Maybe 30s-1min if you don't have a rattle gun.

Only thing you can get to SR ones with is a spanner, not too bad on the passenger side, but drivers side theres also power steering lines in the way so you only have room to move it a bee's d*ck, flip spanner, move it again, flip spanner, etc. massive PITA, takes ages.

To be fair it would have been easier with ratchet spanners, but we didn't have any (Remind me to bring mine this weekend Tristan). But still, next time you are under an RB look how easy those suckers are to get at.

Then theres the culprit heater hoses. Piece of p*ss to get to in an RB, smashed up between the engine and firewall for an SR.

I can't think of anything I found that was easier to do when getting the SR out. Most things were either a little bit, or a LOT, harder to get at.

Edited by Smity42
Yeah 1 bolt from the bottom, which sh*t is in the way of.

Seriously 10 seconds with a rattle gun and both are off an RB. Maybe 30s-1min if you don't have a rattle gun.

Only thing you can get to SR ones with is a spanner, not too bad on the passenger side, but drivers side theres also power steering lines in the way so you only have room to move it a bee's d*ck, flip spanner, move it again, flip spanner, etc. massive PITA, takes ages.

To be fair it would have been easier with ratchet spanners, but we didn't have any (Remind me to bring mine this weekend Tristan). But still, next time you are under an RB look how east those suckers are to get at.

Then theres the culprit heater hoses. Piece of p*ss to get to in an RB, smashed up between the engine and firewall for an SR.

I can't think of anything I found that was easier to do when getting the SR out. Most things were either a little bit, or a LOT, harder to get at.

hmm interesting I cant remember specifics any more, i just remember i had a lot easier time doing the engine in Annas than i did doing the RB25 in the R32, perhaps it was my frame of mind at the time lol

hmm interesting I cant remember specifics any more, i just remember i had a lot easier time doing the engine in Annas than i did doing the RB25 in the R32, perhaps it was my frame of mind at the time lol

31s also seem to have a lot more room than 32s... might have something to do with it? All the engine in/outs I have done have been in 31s... (and now tristans S13 :D)

Turn their power off.

That'll learn em. :P

Can you dump sewerage on them for me?

31s also seem to have a lot more room than 32s... might have something to do with it? All the engine in/outs I have done have been in 31s... (and now tristans S13 :P)

Yeah possilby, because i remember the hoses behind the head in the R32 were a massive epic flamin mongrel when i had to do them lol

Ps i am now missing my old 32 :P I wish i knew where the guy that bought it got too, i want it back! I still cant get over the fack he de tuned it to 245rwkw because he didnt like it at 300+ and then put twin subs in it

Can you dump sewerage on them for me?

Then you would have sewage in your food?!

I went to sewage plants on friday...some parts were very disturbing

Hey Isola, If your talking about the Flem 7, becareful of the 4 speed cameras and all the security cameras in there. Don't wanna see you guys loose your lic. cus that would be as gay as aids :D

Thanks for the heads up, but I'm one of the biggest speed Nazis on the planet. A couple of times I've been naughty, but 99% of them time I'm bang on the numbers. We just want to see how loud we can make it in there :P

Thanks though mate :D

Yes. Reckon I need a license for one of those? Would make the trip to uni a bit more bearable.

f*cking hungry, and canteen doesn't open for lunch for another 10min :D

I was hungry so I had some porridge. So gay...

Turn their power off.

That'll learn em. :P

Have you ever considered a career in terrorism?

31s also seem to have a lot more room than 32s... might have something to do with it? All the engine in/outs I have done have been in 31s... (and now tristans S13 :D )

Can you dump sewerage on them for me?

My 31 engine bay is empty compared to the 32 lol. But I think there are a lot of misc things missing from my 31 lol. Washer bottle for starters lol.

Do it skins or rock up tonight in a skirt! lol

I don't get it?

Ps i am now missing my old 32 :P I wish i knew where the guy that bought it got too, i want it back! I still cant get over the fack he de tuned it to 245rwkw because he didnt like it at 300+ and then put twin subs in it

Interesting. Hows the current 32 going?

Then you would have sewage in your food?!

I went to sewage plants on friday...some parts were very disturbing

How much shit do they put back in our drinking water? A lot?

Ps i am now missing my old 32 :P I wish i knew where the guy that bought it got too, i want it back! I still cant get over the fack he de tuned it to 245rwkw because he didnt like it at 300+ and then put twin subs in it

sounds like you can find him at the beat then

Ps i am now missing my old 32 :P I wish i knew where the guy that bought it got too, i want it back! I still cant get over the fack he de tuned it to 245rwkw because he didnt like it at 300+ and then put twin subs in it

What a douche

Then you would have sewage in your food?!

I went to sewage plants on friday...some parts were very disturbing

But I could laugh, and then go to subway for lunch

Thanks for the heads up, but I'm one of the biggest speed Nazis on the planet. A couple of times I've been naughty, but 99% of them time I'm bang on the numbers.

BAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA

HAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAH

AHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA

HAHAHAHAHAHAHAHAHAHA

*Breathes*

BAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA

HAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAH

AHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA

HAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAH

AHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA

HAHA

I was hungry so I had some porridge. So gay...

Got my winburger now. She gave me 2 slices of cheese :D. She wants me :D

Have you ever considered a career in terrorism?

Does it pay well?

I don't get it?

Me neither...

How much shit do they put back in our drinking water? A lot?

I don't think any atm? crack-wh0re bligh sh*t-canned (excuse the pun) that plan.

sounds like you can find him at the beat then

LOL

Interesting. Hows the current 32 going?

How much shit do they put back in our drinking water? A lot?

Its going ok, as far as i am aware Dan will be getting stuck into the re assembly as we speak!

Not much! the water that comes out of there is really good stuff! Much nicer than the water that goes into the dam naturally.

sounds like you can find him at the beat then

Or its Cairns equivalent :P

and OI I go to the beat...mainly because Anna loves the happy hardcore played in the main room down stairs, upstairs is all a little too flamboyant for me

What a douche

I don't think any atm? crack-wh0re bligh sh*t-canned (excuse the pun) that plan.

Indeed running a 3076 at 12psi, all the lag none of the fun

Yeah none is going in there until total storage hits 40%

Dont lie bunta... im sure u used the excuse.. "i only went up stairs to get drinks honest!"

hahah

Doesnt the family still do happy hardcore? or is it hard trance?

We partying at the Met on the weekend Tas +5 style man the dj is shit.. who mixes hard rock into club trance?

oh the comment about skins do it or wear a skirt tonight

means be a man or your a bish!

31s also seem to have a lot more room than 32s... might have something to do with it? All the engine in/outs I have done have been in 31s... (and now tristans S13 :P )

Can you dump sewerage on them for me?

Consider it done. :P

Then you would have sewage in your food?!

I went to sewage plants on friday...some parts were very disturbing

The inlet at luggage point is disturbing. Sad news they found a dead baby in the inlet works to luggage point. Had its arm broken and some chunks taken out of its head. :(:down:

Thanks for the heads up, but I'm one of the biggest speed Nazis on the planet. A couple of times I've been naughty, but 99% of them time I'm bang on the numbers. We just want to see how loud we can make it in there :D

Thanks though mate :)

Yep thanks mate. Should be awesomely loud. :)

Have you ever considered a career in terrorism?

I'm in. :P

Interesting. Hows the current 32 going?

How much shit do they put back in our drinking water? A lot?

If you turn the tap on and a big nard just plops out then it's just the right amount of sewage in the water. :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
×
×
  • Create New...