Jump to content
SAU Community

Inner West Crew Whoretown (toowong/st Lucia/kenmore/indooroopilly And Sometimes Sunnybank?)


Recommended Posts

I told him you might be unavailable due to hospital stuff, he wasnt worried, he will keep calling till he gets you.

Got back from hospital now. She is on some new pain killers and looks a lot better :P

the awesome part of that is that her husby got appointed as a director of our department, alongside 2 other directors of the old departments, so he gets paid lots but doesnt need to know anything about either department. I guess though to be married to Captain Blight i would want a pretty good sweetner too.

Definitely. But remember to use preferences when voting for greens, they preference to labour :P

Preference to pirate party, sex party, gamer party, and basically everyone else instead.

No I mean. You take my vote, and do it yourself. I'm not voting.

slap slap slap

Well it's going to happen eventually anyway. If not by this one, by the next one. So it's really not worth giving up part of my day and going to a school ON A WEEKEND (if it was weekday and there was JB I'd at least consider it) and wasting my time drawing on paper.

Plus I know NOTHING about politics and refuse to be one of the people who just goes in and donkey votes and screws up the system.

Well it's going to happen eventually anyway. If not by this one, by the next one. So it's really not worth giving up part of my day and going to a school ON A WEEKEND (if it was weekday and there was JB I'd at least consider it) and wasting my time drawing on paper.

Plus I know NOTHING about politics and refuse to be one of the people who just goes in and donkey votes and screws up the system.

What difference does weekend/weekday make to a jobless bum? :P

howdy

huge morning for old tristan

- wheel alignment with roy

- 2nd wheel alignment with roy (3.5camber made my rim rub on coilover) so now 2.5camber - considering looking for some 2mm spacers if i want to try 3.5 in the future

- new wheels fitted with tyres and balanced

- daily is now insured and in transfered the rego

- i has coronas in the fridge cuz my gf is f**king rad and got me some before

- have another 1000words left in my assignment

SUP WITH YOU GUYS?!

Uni is gaids. Estimating is boring and my lecturer sucks donkey dick. I have proof.

Lol, TRD is tuning everything these days

Hopefully we wont have too many vehicles with dodgy accelerators and dangerous floor mats.

I really need some brakes, as Anna wants mine for the sil80, im thinking R33 brembos, but my mate works for a v8 ute racing team and they run alcons....but would need adapting.

hmm not sure what direction to take, this car has been all about enhancing rather than re-engineering so a bolt on fit does appeal, just not sure they will be enough though!

34 brembos or have a look at the K sport brakes? Decent budget upgrade that is being used by a few people on here without any problems.

Atomicbomberman had some impressive brembo brake calipers with him one night. Ferrari ones or some such. Dan or Martin might remember. He was putting them on his 32GTR and they looked like MORE than enough.

They were 8 pot brembos off a corvette if I remember correctly. He has 360 brakes for the rears.

I missed far too much and was going to quote everything and make an epic post but cbf now. So I'll just say Anna Bligh is f**king retarded and uni is gay.

What difference does weekend/weekday make to a jobless bum? :laugh:

Yeah I don't get it. Whenever I have holidays it takes me about 3 days to forget what day of the week it is. :P

Well it's going to happen eventually anyway. If not by this one, by the next one. So it's really not worth giving up part of my day and going to a school ON A WEEKEND (if it was weekday and there was JB I'd at least consider it) and wasting my time drawing on paper.

Plus I know NOTHING about politics and refuse to be one of the people who just goes in and donkey votes and screws up the system.

What difference does weekend/weekday make to a jobless bum? :P

I put it in there originally for the sole reason you wouldn't need to ask why a weekend/weekday was any different.

Attn Gay cowboy aka josh:

I haven't done a cambelt in a 355 but i have seen it done, you will need a hoist and a frame. Removal of the engine and rear suspension subframe is the fastest way to do it, also the easiest, in 360 and later you can remove a panel behind the drivers seat to change the belt. I can give you some names if you want it done for cheap

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • @Murray_Calavera  If I were an expert I wouldn't be in here looking for assistance.  I am extremely computer literate, have above average understanding on how things should be working and how they should tie together.  If I need to go to a professional tuner so be it, but I'd much rather learn and do things myself even if it means looking for some guidance along the way and blowing up a few engines. @GTSBoy  I was hoping it would be as simple as a large vacuum leak somewhere but I'm unable to find anything, all lines seem to be well capped or going where they need to be, and when removed there is vacuum felt on the tube.  It would be odd for the Haltech built in MAP to be faulty, the GTT tune I imported had it enabled from the start, I incorrectly assumed it was reading a signal from the stock MAP, but that doesn't exist.  After running a vacuum hose to the ECU the signal doesn't change more than 0.2 in either direction.   I'll probably upload a video of my settings tomorrow, as it stands I'm able to daily drive, but getting stuttering when giving it gas from idle, so pulling away from lights is a slow process of revving it up and feathering the clutch until its moving, then it will accelerate fine.  It sounds like I need to get to the bottom of the manifold pressure issue, but the ignition timing section is most intimidating to me and will probably let a pro do that part.  Tomorrow I'll try a different vacuum line to T off of, with any luck I selected one that was already bypassed during the DBW swap. @feartherb26  I do have +T in the works but wanted to wait until Spring to start with that swap since this is my good winter AWD vehicle.  When removing the butterfly, did it leave a bunch of holes in the manifold that you needed to plug?  I thought about removing it but assumed it would be a mess.   I notice no difference when capping the vacuum line to it or letting it do its thing.  This whole thing has convinced me to just get a forward facing manifold when the time comes though.
    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
×
×
  • Create New...