Jump to content
SAU Community

Recommended Posts

the brand is catco

made in usa

HIGH FLOW 3 inch cat converter.

!!!!!WITH FLANGES!!!!!! BOLT ONTO SIL/180/GTST/GTR

also have the hole for the sensor!!!

BARGIN $250 BRAND NEW

U CAN EVEN DO IT YOUR SELF insted of taking to exhaust shop!!!!

Link to comment
https://www.sau.com.au/forums/topic/26284-fs-brand-new-high-flow-cat-3-inch/
Share on other sites

ah ok, yes thats one of the cats i sell.

if you got a bolt on cat, then it wouldnt fit all the cars you stated above, the bolt on cats vary on the type of car as they are not all the same length and the flanges arent on the same angle.

for example r32/33 bolt on is differnet to 180sx bolt on. also 200sx s14-15 have their own different lengths, so it depends on the cat that you have, and what its made to bolt on to.

im assuming its for r32/33, since the 8007 cats are usually made bolt on for these cars.

Originally posted by SKYL9

hey dont wanna burst your bubble but BATMBL sells them for nearly half that price

just thought id have a winge and say that BATMBL does sell 3 inch cats for nearly half my price BUT HOWEVER it is NOT the SAME CAT as im selling. THE one thats nearly half the price is infact a LOWER FLOWING 3 inch cat!

BATMBL also DO sell the one im selling BUT AT VERY VERY SIMILAR PRICE!!!!!!!

sOOOOOOOO............my bubble is still intact

anyways the cat is sold, thanks for letting me have a winge.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...