Jump to content
SAU Community

Recommended Posts

1st question.....ok so my car drives normally then all of a sudden the car automatically revs the shit out of the car and hits 8rpm and doesn't stop so i pull over and turn the engine off and start again sometimes it starts normally other times revs to 5-6 by itself? wtf i blew my turbo last week and had plastic shit/little black pieces in the afm so cleaned it all out with air compressor and looked fine could my afm shit it self? this only happened after i blew the turbo. (and the afm was located on the intercooler piping now have changed it back to stock with a pod)...help please

running fuel pump, fmic, pod, r32 turbo with hks actuator at 12 psi, full 3inch exhaust

2nd question......i had a remap computer mods were fuel pump, fmic, boost tee 13, pod, r33 turbo, full 3inch exhaust,

now since i blew my r33 turbo and i put my r32 turbo back on can i still run the remap computer?

i know its better to get a tune but dr drift was booked out and other places.

and winton is this Sunday so need answers asap

3rd Question......i have a z32 afm can i unstall it with the remap computer and not have any problems (as in no need for a tune?)

cheers guys

1st question.....ok so my car drives normally then all of a sudden the car automatically revs the shit out of the car and hits 8rpm and doesn't stop so i pull over and turn the engine off and start again sometimes it starts normally other times revs to 5-6 by itself? wtf i blew my turbo last week and had plastic shit/little black pieces in the afm so cleaned it all out with air compressor and looked fine could my afm shit it self? this only happened after i blew the turbo. (and the afm was located on the intercooler piping now have changed it back to stock with a pod)...help please

running fuel pump, fmic, pod, r32 turbo with hks actuator at 12 psi, full 3inch exhaust

2nd question......i had a remap computer mods were fuel pump, fmic, boost tee 13, pod, r33 turbo, full 3inch exhaust,

now since i blew my r33 turbo and i put my r32 turbo back on can i still run the remap computer?

i know its better to get a tune but dr drift was booked out and other places.

and winton is this Sunday so need answers asap

3rd Question......i have a z32 afm can i unstall it with the remap computer and not have any problems (as in no need for a tune?)

cheers guys

As the throttle is cable driven, one might assume it relates to that somehow, as with the throttle closed the engine wouldnt be able to rev to 8k. I'd check to see if the butterfly is sticking open or that the linkages are not tight.

You can run the remap computer, but it might not run right, and might not be good for the engine. Best get it retuned.

I doubt you can remove the z32 afm without a retune, it might run as per question 2, but it might be bad for the engine or not work at all

you can run the car with the stock turbo and the remap suited for the r33 turbo but it will run rich. apart from that it will be fine.

you can not remove the z32 and put the stock one back on. it would start but be un drivable ;)

Did I do the remap for you?

cheers!

ok ill check those and with the z32 i have not instilled it on my car yet i want to put the z32 in now so will the car run fine with a remap and z32 not tuned???

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...