Jump to content
SAU Community

Recommended Posts

ok i took my afm off n i noticed the mesh on either ends of it yer well one of the mesh bits was all torn n had holes in it so i thought i may aswell just take it off n then i just put it all back together n i started it up n took it for a drive n wen it revs above 2500 revs it starts to jump, sorta like when you stall it so i have no idea wat has happened i dont know if its that mesh bit or if i have plugged the afm plug in wrong or wat so if you know whats happened please let me know asap

Link to comment
https://www.sau.com.au/forums/topic/268270-need-urgent-help-with-afm/
Share on other sites

check the little sensor inside the afm if it looks like it has been damaged then you need to replace your afm. otherwise you can go to supercheap and by this stuff in a spray can caled mass airflow cleaner and spray the insides of the afm. the mesh missing wont make any differencs. didnt on my afm.

this was done before all the things listed in the first post the thing that the afm plug plugs into my mate said you have to take this off to see if its all clean inside the afm it looked all gd so we just bolted it back in could unbolting this have anything to do with my problem

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...