Jump to content
SAU Community

Recommended Posts

hey guys my dreams got shattered today after trying to fit these onto my r33 gtst after just buying them at the start of this week. fell in love with the look and the rareness of these wheels! the rears were awesome and they stuck out of the guard just a tad just how i liked but the fronts did not fit due to no clearance for the caliper!!!!!!!!

i got these from jms in adelaide and they told me they came off a r33 skyline so i had no problems but they were obviously wrong and i'm not happy at all!!!! :)

i have to sell them now as i don't want to run spacers or anything. offset is unknown as it doesn't mention anything at all on the rim except for manaray, jwl and size. the rears though seem to be around the +30 mark and front within +38 to +30.

if you are interested bring your car around and we'll test fit the fronts on and if they fit they should be o.k. this is considering you dont have a 33 and have small front brakes. have a feeling they could fit on a soarer or fc pretty well. if you have a r32 i am pretty interested to see if they would fit on the front as they mentioned it would fit a skyline but they might have meant r32 and not r33.

*edit* the rears come with screw on/screw off spacers that actually bolt onto the wheel on the back of where the rim sits on the hub. its just under a cm.

specs are:

front 17x8.5 with crap 245/40R17

rear 17x9.5 with crap 245/45R17

the wheels are old but they are in good condition for the age. if you want show rims these arent it. they have a bit of gutter rash, some scratches but overall very good and still shiney condition. they have the centre caps and everything. give them a bit of a clean and they will look great like what they first looked like when jms got them in the picture. (picture is of the actual rims)

want $850ono and i don't want low ballers cause i love these rims. will swap for anything of interest. need these gone asap so i can get some new rims. pick up in western suburbs of vic or will send interstate but at ur own cost. call/msg me on 0432454387

20070605160108.jpg

Edited by jakez88

dude just keep them and run a 15-25mm bolt on spacer, too easy and safe, or even a 5-8mm slip on depending on how far off they are.... or as heaps of people do, file your calipers down a bit, you can take quite a fair bit

i think i might have to run spacers if no one wants to take them off me. gonna have to harden the fk up lol but i'll see how i go with the sale first.

mattysaidso the wheels are at japanese motorsport in adelaide or JMS. the wheels ur after are manaray vr5s but i don't htink they have em anymore.

i'm trying to source out a 20mm bolt on spacer for my fronts and new lug nuts as the standard nuts won't allow me to stick the socket in. clearance is to small. if someone wants them though and for the price i'm asking then i will sell them otherwise my adventure of getting these fitted on the front of my car starts now lol.

pms replied guys. no low ballers please. anyone interested?

i have put the bolt on spacers from the rear to the front and they still dont clear my 33 calipers BUT could most likely clear r32s as there is only a few mm needed to clear. any 32 owners taht are interested and wanting to test fit are welcome.

Edited by jakez88

alrighty these wont fit a r32 as i tried with a friends and didn't fit. need about a 15mm spacer or jsut go 25mm.

measured up as best i could the offset and they seem to be fronts +45 and rears about +38 so definately suitable for a soarer, supra or chaser etc that run high offsets. best to fit up before purchase though.

anyone have a soarer or supra? or if your a hard kunt and wanna run spacers on the front then buy them. $800 guys or throw me an offer.

Edited by jakez88

they wouldn't fit because of the calipers unless you use spacers up front

Edited by jakez88

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...