Jump to content
SAU Community

Recommended Posts

hey all

as title says here are the parts for sale...

  • KKR EXT GATE 38MM + CUSTOM ASE SCREAMER $$210ono
  • R32 LSD $$200ono
  • R32 RB20DET BLITZ TUNED ROM $$200!!!!
  • R32 Unkowen Jap Brand 2.5-3" cat back exhaust $$200 in gd cond!!
  • R32 Drivers + Passenger Doors w/ elec window regs $$200 the pair
  • R32 D + P Front Seats in gd condition, D-Side got a few lil wear marks on door side other than that all good $$180 the pair
  • R32 Rear Seat $$60
  • R32 full set of gtst carpet/mats drivers one rooted, so will throw it in for nothing, after $$80 for the complete set
  • R32 Rear Window $$100
  • R32 QTR Windows $$70 the pair
  • R32 Climate Control, mint cond. $$100
  • R32 Dash Vents all in mint condition... PM ME PLEASE ABOUT PRICE
  • R32 Stock rims, with a virtually brand new pair of firehawks, $$250

need parts gone asap, pref this next fortnight!! as my shed maxxed out allready and need more room for gear on its way :D

can post at buyers expense...

located in ADELAIDE, SA

contact for any information please, via PM ONLY PLEASE

thanks

Benji :)

pics on the screamer and gate please. also wht was the ecu tuned for and can it be retuned?

could you please pm me a mobile number so I can mms it to you...

umm dont think so.. as blitz do them as a once off tune I think...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...