Jump to content
SAU Community

Raybrig Lights

Ryan D

By Ryan D,
in General Automotive Discussion

 Share

Recommended Posts

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Craved Grand Master

Craved

Posted
Posted

anyone seen whiter/brighter HIGH beam globes for sale? mine are not bright enough for out here in the bush :D

got whiter globes in the low beam and really tell the difference when switching from high to low beam!!!

Gradenko Mentor

Gradenko

Posted
Posted

Does anyone have any technical (non-marketing) info on these?

Rezz, running 90w globes in place of the standard ones is risky as the stock wiring isn't rated to carry that load. It'd also be inconsiderate and illegal to run them as your normal beam. 90w as high beam with upgraded wiring is a good idea though and less likely to be targeted.

Craved, high beam globes are the same as low beam globes. If uprated globes for high beam aren't enough for country driving, look at dedicated driving lights.

I suspect these Raybrig lights are similar to the current range of xenon halogen globes most lighting manufactures have out. They aren't standard replacements so you'll have to ask for them by name. eg Philips VisionPlus.

Rezz Grand Master

Rezz

Posted
Posted
Originally posted by Gradenko

Does anyone have any technical (non-marketing) info on these?

Rezz, running 90w globes in place of the standard ones is risky as the stock wiring isn't rated to carry that load. It'd also be inconsiderate and illegal to run them as your normal beam. 90w as high beam with upgraded wiring is a good idea though and less likely to be targeted.

Grandenko, thanks very much for that, I overlooked the wattage rating.

But I understood (with the Raybrig globes) that 90w was when hi-beam is on? Usually the globes are 55w on lo-beam...?

Craved Grand Master

Craved

Posted
Posted

Just wondering about cars like the R33 which have a separate globe for the high beam! is there a straight 90w option for these as they would have to be different ratings as the low beam lights turn off when they come on! therefore for our cars the low and high beam are not the same globes!

"Craved, high beam globes are the same low beam globes. If uprated globes for high beam aren't enough for country driving, look at dedicated driving lights. "

hehe, dont really think driving lights would suit the skyline :D

any suggestions?

Craved Grand Master

Craved

Posted
Posted
Originally posted by Rezz

Craved, Raybrig say the RR15`s are for the "4 headlight" cars as well... I guess that means R33`s.

so they only sell the one globe for 4 headlight cars? what does the plug for the lights look like? are they normal single blade fitting? or tri blade?

Rezz Grand Master

Rezz

Posted
Posted

Guys, guys...

Forgive me if I`m wrong, but aren`t there 2 elements in each globe? If your car has only one globe per headlight, on low-beam, the 50-odd watt element lights up... and on high-beam, the 90 watt whatever element lights up?

I understood that if you wanted these "HID type" halogens on a 4-headlight car, you have to decide whether you want to upgrade the low-beam or high-beam...

Am I wrong? I`ve only ever seen these Raybrigs on my brothers PAS trophy winning Toyota LiteAce (which is a 2 headlight van) and they were normal wattage on low-beam, and a higher wattage on high-beam.

Craved Grand Master

Craved

Posted
Posted

In the R33, they are 4 headlight: 2 on low beam, other 2 on high beam! low beam lights are definately only single element lights, so would assume the same with high beam as only one on at a time eg 2 outside lights on on low beam, 2 insides lights only on high beam!! therefore the globes must be of different output wattage!

ps did you get my email Rezz?

Aurora Mentor

Aurora

Posted
Posted

Are you sure they're not the same wattage? Just angled higher?

Because i want to purchase Phillips Blue Vision H1 55W for the low-beams, they come with the parkers. Then a set for whatever the High-beams are, and also find out what bulbs i need for the lights in the front bar of the Series II, cause i always drive with them on, and they'd need to match.

Gradenko Mentor

Gradenko

Posted
Posted
Originally posted by Craved

Just wondering about cars like the R33 which have a separate globe for the high beam! is there a straight 90w option for these as they would have to be different ratings as the low beam lights turn off when they come on!  therefore for our cars the low and high beam are not the same globes!

Sorry, what I meant by "high beam globes are the same as low beam globes" is that both low and high beam use the same type of globes - H1. There are seperate globe holders/lamp assemblies for each and they both use H1 55w globes. The only difference, funnily enough, is that the high beam lamp is physically aimed higher than the low beam lamp. 90w bulbs for the high beam lamp would be a good idea though, along with the required wiring upgrades.

Forgive me if I`m wrong, but aren`t there 2 elements in each globe? If your car has only one globe per headlight, on low-beam, the 50-odd watt element lights up... and on high-beam, the 90 watt whatever element lights up?  

Rezz, I think you're talking about H4 globes, they have 3 pins and 2 filaments of different wattages. Some cars use a H1 for high beam and a H4 for low/high beam.

Craved Grand Master

Craved

Posted
Posted
Originally posted by Obseshn

Are you sure they're not the same wattage? Just angled higher?

Because i want to purchase Phillips Blue Vision H1 55W for the low-beams, they come with the parkers. Then a set for whatever the High-beams are, and also find out what bulbs i need for the lights in the front bar of the Series II, cause i always drive with them on, and they'd need to match.

hey, are those lights on the front bar actually giving off light, or just looking nice!!! if it was to look good, try following this thread to make them look real nice and white!!

LED LIGHTS - these look good

Craved Grand Master

Craved

Posted
Posted
Originally posted by Gradenko

Sorry, what I meant by "high beam globes are the same as low beam globes" is that both low and high beam use the same type of globes - H1. There are seperate globe holders/lamp assemblies for each and they both use H1 55w globes. The only difference, funnily enough, is that the high beam lamp is physically aimed higher than the low beam lamp. 90w bulbs for the high beam lamp would be a good idea though, along with the required wiring upgrades.

Do you know what would need to be upgraded to run higher wattage high beams lights? also i haven't seen brighter lights in higher wattage in normal shops!

Ryan D didn't seem to have any issues, he's saying that he was running 90W in his car!

interested to see what comes of this though! also is there any lights about say 70W or so, something brighter, but not enough to blind oncoming traffic!!

Gradenko Mentor

Gradenko

Posted
Posted
Originally posted by Craved

Do you know what would need to be upgraded to run higher wattage high beams lights?  also i haven't seen brighter lights in higher wattage in normal shops!

Ryan D didn't seem to have any issues, he's saying that he was running 90W in his car!

You'd have to speak to an auto electrician or car audio installer about wiring upgrades. Its just higher gauge +ve cable run via a relay and a new earth. Ask them about the risks of running 90w globes in place of standard 55w globes.

I really would leave high wattage globes for high beams only.

Ryan D Rising Star

Ryan D

Posted
  • Author
Posted

Yourve all confused the shit out of each other for no reason,

The R33's lights, both low and high beam are h1 type

lowbeam = 55w

high beam = 90w

the wiring is suited to this, even more wattage if wanted.

If yourve got an R33 just get two packs and replace all the lights.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...