Jump to content
SAU Community

Recommended Posts

Hi every-1

Have a KKR 430 here for sale with the matching dump pipe the RRP on this is $840 for the turbo and $149 for the dump looking at $700 for both. The turbo has just been rebuilt for sale and has had a new core put in and balanced, Turbo has around 5 months warranty left on it also :P any questions just post here or flick me a message postage is around $30. It does have a actuator just wasn't on in the pics. Located in Tasmania

Responsive turbo upgrade for RB20 and RB25

This is our most popular Kombat-series turbocharger, offering excellent response and overall performance on Nissan RB20DET and RB25DET engines. The turbine is bigger than on a 380, but a 0.56 A/R exhaust housing promotes quick response. It is a good choice for 2.0 litre to 3.0-litre engines. It is also good for twin-turbo applications on 4.0-6.0 litre engines.

Specifications

Compressor side

Inlet pipe 70mm, outlet pipe 50mm 48 trim compressor; inducer 53mm, exducer 76.5mm

Exhaust side

0.58 A/R turbine housing, Turbine wheel outlet 48mm, outer diameter 64.5mm

Results

As a single turbo on a 2.5-litre Nissan RB25DET engine we have seen 240kW at the wheels with 15psi boost.

KKR 430

DSC00831.jpg

DSC00832.jpg

DSC00834.jpg

Link to comment
https://www.sau.com.au/forums/topic/275508-genuine-kkr430-cheap/
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...