Jump to content
SAU Community

Recommended Posts

I have a 1996 R33 Skyline GTS-T Series 2 with very mild mods - TurboXS High Performance Boost controller set to 10psi and a 3" dump leading into a stock cat-back exhaust system.

I've read various threads indicating that an Apexi S-AFC makes a good improvement even on a stock vehicle. But upon speaking with some performance shops in Sydney, they've indicated that I may not gain anything.

Can I please get some comments from fellow members who are using an Apexi S-AFC and the mods on their vehicles.

I was looking at getting an S-AFC II but now I'm thinking twice. :)

Link to comment
https://www.sau.com.au/forums/topic/27552-to-s-afc-or-not/
Share on other sites

I'd be very surprised if it didn't give you an imporvement. The only real way to tell is to have a dyno run which shows the AFR's, and depending on how far it deviates from the desired level (about 12:1) then you can determine whether it will have a major impact.

If your considering full management down the track then save for either the PowerFC or Wolf.

Link to comment
https://www.sau.com.au/forums/topic/27552-to-s-afc-or-not/#findComment-577226
Share on other sites

Full management will give you more gains due to the fact it can control the timing aswell as the fuel, but really depends on how far you want to push the modifications. If your sticking with the stock turbo then get an SAFC, if your planning on doing a turbo upgrade then go full management.

Link to comment
https://www.sau.com.au/forums/topic/27552-to-s-afc-or-not/#findComment-577252
Share on other sites

It really depends on what future plans you have for your car. If your just gonna get a full exhaust later and maybe a tad more boost than a SAFC will serve you very well. If your planning on getting a bigger turbo etc later on, then get a PFC first.

Link to comment
https://www.sau.com.au/forums/topic/27552-to-s-afc-or-not/#findComment-578218
Share on other sites

These are all valid points that have been raised However I have a SAFC on my R32 and it works like a charm. I wouldn't bother running an SAFC or any other management with those mods, because in my opinion it wouldn't be worth your while. I have a bigger turbo, FMIC, BOV, 550hp pump and SAFC and am making 320hp at the wheels. I don't think that I really need a Microtech or anything like that, and consider that SAFC's are going cheap on ebay for like $250 you cant really go wrong. You can do all the fuel related tuning with the SAFC and max out the duty cycle on your fuel system, and it removes your boost cut fuel cut and speed cut. I think thats all you basically need unless you are after really big power an SAFC will do fine. Sure you don't have the fine tuning as others might but then again you don't have the problems such as rough idle, stalling, hard to start because your std ECU runs everything else like it was a standard unmodified car. hope this helps.

Link to comment
https://www.sau.com.au/forums/topic/27552-to-s-afc-or-not/#findComment-578312
Share on other sites

Well depends how your car is running now. Mine was running like a dog with full exhaust and extra boost. Turn the boost up and it was terrible. Not once i could rev it out cleanly. Turn the boost down and it was better put still missing. It turned out too be, too much fuel. Put the SAFC in and with some tuning and some extra boosting, the power curve went from 120rwkw to 178 rwkw. If i was running standard boost it may have been more than 120rwkw without the SAFC but not much more. Now it revs out cleanly in any gear and i love it.

Link to comment
https://www.sau.com.au/forums/topic/27552-to-s-afc-or-not/#findComment-578386
Share on other sites

Don't forget though to check how much it will cost you to get the safc installed as it needs to be spliced in the stock ecu whereas anyone can plug in the powerfc and select the base fuel map, i would recommend powerfc over safc if you can afford it plus with fc commander you can check all the duty cycles/knock sensor/temps and everything.

Jamie

Link to comment
https://www.sau.com.au/forums/topic/27552-to-s-afc-or-not/#findComment-578405
Share on other sites

I think ANYONE would recommend the PowerFC over the S-AFC if they could afford it. The real question is it worth going without any ECU modification at all until you save up the required $1100+ for the PowerFC?

My answer would be definitely not. If you are strapped for cash then get a 2nd hand S-AFC then sell it for what you paid for it and buy a PowerFC after you've saved up the rest.

But if you are sick of shovelling money into the bottomless pit that cars are, be happy with the S-AFC. It's better than nothing and a good place to stop at for ECU mods.

My S-AFC was installed for free. By me :(

Link to comment
https://www.sau.com.au/forums/topic/27552-to-s-afc-or-not/#findComment-578425
Share on other sites

Thanks guys for all your input.

I don't plan to do much more to my car. At the most, maybe replace the stock cat back exhaust system. Based on this, i don't think I will ever need to go to a PowerFC.

The only reason why I'm considering the S-AFC is because a friend of mine is going to Japan.

He has already done some shopping around and could potentially pick up a 2nd-hand S-AFC II for less than AUS$150.

I figure, if I don't gain much from it, I could just re-sell it.

Link to comment
https://www.sau.com.au/forums/topic/27552-to-s-afc-or-not/#findComment-578497
Share on other sites

Originally posted by GTS-t VSPEC

Full management will give you more gains due to the fact it can control the timing aswell as the fuel

Well, couldn't you use an aftermarket ignition with "boost retard" to pull the timing while in boost? I know MSD has the BTM which will do this for distributor cars, but is there one for distributorless cars?

Also, what kind of power is the SAFC setup capable of handling?

Link to comment
https://www.sau.com.au/forums/topic/27552-to-s-afc-or-not/#findComment-578671
Share on other sites

Originally posted by silver33

He has already done some shopping around and could potentially pick up a 2nd-hand S-AFC II for less than AUS$150.

You're only paying $150 and you're asking if you should bother or not?! Dude, even if you bought it and never installed it, you could immediately sell it for $200-300 profit easy. Just get it, no question needs to be asked! But yeah I think you should install it once you get it rather than immediately selling it :D

Link to comment
https://www.sau.com.au/forums/topic/27552-to-s-afc-or-not/#findComment-578686
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This. A 3d wheel alignment is like $120...just take it to the shop. Since theres probably multiple adjustments that need to be made after changing something. Mine has front/rear lower arms, traction rods, tension rods, camber arms, toe arms, front upper arms, hicas kit, sway bars and coilovers. I measure from the edge of the bolt holes on the originals and set the same length on all the adjustable stuff to dial it as close as I could to OEM. Took it straight for alignment; it didnt feel right at all...after alignment, it feels perfect. Similarly i've just changed the springs on another car; and I still needed multiple adjustments to bring it back in spec.
    • A full Veilside kitted JZA80 Supra in Meriken park in Kobe city a few weeks back
    • Its a well known brand in New Zealand; its a rebrand of the Rhino RAV3.  I don't know what the wiring difference *is* between the rev.1 (installed about 15 years ago) and rev.2; but as you say I would think its reasonable that it uses the same immobiliser relay circuits. I had a look but couldnt see a similar harness; but didnt move things around since I didnt want to mess with it   It was one of AVS well known Authorised Installers; I spoke to AVS themselves about it but theyre unsure hence seeking advice more so from the skyline community who are more familiar with the actual car and its wiring. Im in Auckland; but the installer is on the other side of the city so hes very reluctant to come back to even look at it to confirm something isnt connected into the wrong wire.  I dont want to drop the name since they *did* do a really good job for the most part. Everything is very tidy and he fully replaced all the alarm wiring, all the sensors, the wiring to the door motors, installed a switch which was never installed in the first place...really happy with the alarm install itself..just not this one issue. We all make mistakes, if it is the alarm, I just want my fuel pump getting proper switched, fused, power as it was; without having to shell out for an auto electrician to switch a wire and tell me it was the alarm. 
    • Even with the piston at TDC there was room for it to drop, but I don't think it can drop fully into the cylinder, the problem you have is that you need something pushing against the valve to hold it up so you have enough room to put the new stem seal on and the spring etc.  I used compressed air only because putting rope in the cylinder seemed a bit risky to me, I know people have done it countless times before like this. Overall it's a pain in the ass job. Honestly you'd probably be better off taking the head off because the risk of dropping something in the engine and the finicky-ness of it all is very stressful. If you are going to attempt it though i 10000% recommend a 36050 valve spring/keeper tool. I had both the traditional lever type and after doing 1 cylinder it was absolute pain to get those valve keepers in place, even with 2 people. That 36050 is amazing, you do have to push hard to get them in place but it works perfectly almost every time. Back to my actual issue I think my engine is just tired and old and the rings have gone bad. The comp numbers (cold, no oil) were: Cyl 1 -129psi Cyl 2 - 133psi Cyl 3 - 138psi Cyl 4 - 137psi Cyl 5 - 157psi Cyl 6 - 142psi   Cylinder 5 and 6 having the most carbon on them.
    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
×
×
  • Create New...