Jump to content
SAU Community

Recommended Posts

I did, but then i sent them off to get flow checked and cleaned and the pricks threw out the boxes.

It was the same part number listed on google etc. I think slide sells them on here under the traders, the part number should be listed there.

hi Ian, the part number should be 63587

サイズ

(流量) タイプ 抵抗 噴霧孔数 カプラー色 カプラー形状 商品コード

530cc TOP 高(High) 4 Pale Blue 楕円 63590

650cc TOP 高(High) 2 Yellow 楕円 63586

800cc TOP 高(High) 2 Purple 楕円 63587

hope this help.

that's the problem it's not :) basicly the injectors not pulsing etc had all the settings right on the PFC 1.6mlag time etc, my tuner even called some people on the mainland to see if he was doing anything wrong but they said it was spot on, So he thinks i might have the wrong impedance injectors ?

that's the problem it's not :whistling: basicly the injectors not pulsing etc had all the settings right on the PFC 1.6mlag time etc, my tuner even called some people on the mainland to see if he was doing anything wrong but they said it was spot on, So he thinks i might have the wrong impedance injectors ?

Does the car run? Or dont any of the injectors pulse?

Its pretty common for injectors to "stick" if they have been sitting around for a while. My brother has some 850cc denso's and the car was rough, sounded like only 5 cylinders were firing. Got a screw driver and gave the injectors a gentle tap and it was fixed. Its quite funny to see, and it seems dodgy, but thats all they need.

Or you could be right, that little ridge might been its a totally difference injector, but i doubt sard would make an injector that shared the same colour and shape and have different impedance. Have a scan through all the sard injectors and see if there are anyother top feed purple injectors.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...