Jump to content
SAU Community

Recommended Posts

Just want anyone to express their interest in my catback exhaust. Really would like to swap it for a 3-3.5inch catback with a cannon. Prefferably with a muffler so its not over the top loud. I'm looking for somethings with a bit more of a note for my car.

This catback is nice and sedate but opens up when on WOT.

I've been told its a Fujitsubo/JASMA exhaust system that is a different design to any i have seen. AFAIK its a twin 2 1/4 system. It did have 3 hotdags all up but i had two removed to give it a slightly louder note. The third hotdog is there to slow the gases in the shorter pipe so they exit at around the same time as the ones in the longer pipe. The twin pipes then enter the JASMA branded muffler. When i got it, it had twin DTM tips the swooped up. I had these changed to straight exit pipes and had the exhaust lifted a touch to minimise scrapping.

Well this is alot of blabbing so ill just chuck up some pics.

post-53838-1245754836_thumb.jpgpost-53838-1245755071_thumb.jpgpost-53838-1245755094_thumb.jpgpost-53838-1245755119_thumb.jpg

^^ last pic the exhaust is lop sided because its off one of the hangers

If you are interested, send me a PM with pics of your exhaust and ill consider. still not 100% but want to know what kind of interest the exhaust gets.

Edited by SLY-25T
Link to comment
https://www.sau.com.au/forums/topic/276157-eoi-twin-catback-exhaust-system/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...