Jump to content
SAU Community

Coil Packs

fat-lad

By fat-lad,
in Four Door Family & Wagoneers

 Share

Recommended Posts

fat-lad Rising Star

fat-lad

Posted
  • Author
Posted
I'm a little confused, are you still trying to see if the coil packs are bad? If so, the quickest way to find out would be start the car and then disconnect one coil pack at a time. If there is no change in engine idle when you disconnect the coil pack, thats your bad one.

Also are these the same coil packs that are on R33 and R32 skylines? If so I should be able to track down a set of used ones for fairly cheap. Anyway let me know.

lolololololol, mate ive been a mechanic for a quite a few years and i never thought of that hahhahahhahahahahahahahahahahaa

im absolutly ashamed of myself, ill get it done

kiwi - yeah its completly blocked off mate, it solved the problem straight away, well for the stalling issue anyway,

xmetal - i know its not the bov making it idle rough as its block, the bov was the sole problem to my stalling issues when we 1st got the car

jutto87 Enthusiast

jutto87

Posted
Posted

mate i reckon its your cam angle sensor. had very similar symptoms with my 33 and ended up being a cam angle sensor. put splitfires in before i replaced the sensor and fixed it a little but once the sensor went in she was sweet. give it a shot if you've got one handy.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Murray_Calavera
      WTAC 2025

      By Murray_Calavera · Posted

      Yeah mate, never miss it.
    • Ozdavroz
      WTAC 2025

      By Ozdavroz · Posted

      Any going to watch World Time Attack at SMSP this year?
    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
    • zillah
      Recommendation for engine oil funnel spill free

      By zillah · Posted

      hahaha good on
×
×
  • Create New...