Jump to content
SAU Community

Recommended Posts

hey guys

well had my new car two weeks now, loving it so far.

anywho my car came with the 34 gtt wheels on it, so today i unplugged my sub to see what spare wheel i had.

check the wheel, put the subs back in the boot, wired them up and now nothing.

also, the sound system still works but just no subs.

i dunno much about the sound system but its a cadence (or somthing) amy that is powering 2 JVC subs and for some reason they decided not to work.

i manage to ellinimate the following possible causes:

1: wires touching (if they did at any point there was no power running through the sound system/car)

2: wrong wires in wrong connections (dont know much about sound systems but i remember what wire connected where, but it didnt work, tried change the wires to the terminals but still nothing, hook it back up the way i rememberd undoing them but still nothing.)

there is power to the amplifier, and when i turn the key to the first notch that powers only the clock and sound system, i get one doof from the subs but then nothing with music going.

can anyone help me?! its driving me nuts!!!!

Edited by buckets
Link to comment
https://www.sau.com.au/forums/topic/276883-need-some-help-all-out-of-ideas/
Share on other sites

If u get a "doof" initially when you turn it on, id definatley say theres wires touching eachother and its shorting out.

If you put the volume level down low enough, there shouldnt be enough current to short it out so try turning it on with the sound low and see if the subs work. If they work, its wires making contact where they shouldnt.

Hope this helps, good luck

If u get a "doof" initially when you turn it on, id definatley say theres wires touching eachother and its shorting out.

If you put the volume level down low enough, there shouldnt be enough current to short it out so try turning it on with the sound low and see if the subs work. If they work, its wires making contact where they shouldnt.

Hope this helps, good luck

hey man, gave it a go

didnt work.

i also noticed that the doof at the start looks like the subs going in and out.

like its a doof before the music starts, subs flow in and out couple of times (not a loud doof) but then no noise once music is on

If u get a "doof" initially when you turn it on, id definatley say theres wires touching eachother and its shorting out.

If you put the volume level down low enough, there shouldnt be enough current to short it out so try turning it on with the sound low and see if the subs work. If they work, its wires making contact where they shouldnt.

Hope this helps, good luck

hey man, gave it a go

didnt work.

i also noticed that the doof at the start looks like the subs going in and out.

like its a doof before the music starts, subs flow in and out couple of times (not a loud doof) but then no noise once music is on

Ahh tht sucks, sorry mate not much else i can think of without acctually seeing it, im not exactly a guru on the subject anyways, i just know the basics.

Ill re-post if i can think of anything else but untill then, maybe get a mate to hook their sub up to the amp and see what happens, then you know if its the subs or the amp.

Edited by Joe_89

hey guys

today i manage to check the wiring, wiring inside the sub and the amp's fuse.

all fine.

so no idea what is wrong now, also worked out i have a monoblock if that changes.

any ideas would be great, will check connection to head unit tomorrow

Do you get a light on the amp when it's on? check to see if theres a key anywhere e.g. green for OK red for protect mode.

Since you're getting the initial "doof" when the amp turns on it's getting power, if the amp stays on it's possible the RCA leads from the head unit have been knocked out. It's also possible moving everything around you've changed the AMP from low to high crossover, check on the amp for such a switch it should be in the low position for subs.

hey guys

well today i was able to get to the back of my headunit, all connections were fine along with RCA connections.

whilist i had the headunit out, i changed my headunits (one in my old car was better)

did all the wirering and presto, the subs now work!

no idea how but, thinking RCA connections in back of headunit were dodgey??

many thanks to leon for all his advice, top bloke! :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
    • The maxpeedingrods turbo is cheap and bolts on to stock parts. I think you just need a bigger silicone coupler for the intake. Its a cheap china turbo, but it's been running on mine for almost 3 years at 16-19 psi.
    • What do they look like right after you've tried to start it with everything connected? Also post photos of what they actually look like.
    • Also wanted to say, my new spark plugs are blackened looks like it's very rich. I have splitfire coilpacks but stock coilpack loom and ignitor. I tried directly grounding the ignitor ground to body as well. 
×
×
  • Create New...