Jump to content
SAU Community

Recommended Posts

Should be good :D Hope to see a few Skylines about too on the cruise. Looks like we'll be expecting 50 odd cars so will be well worth getting out to this one guys and girls!

Joe, just quoted this from McGnarly:

Ladies and gentlemen,

For those of you who live northside and want to come on streetfames somerset cruise, we will be meeting at milton maccas and bp at 7:30 for a leave before 7:50 heading down to underwood to meet with everyone else, this will give us a chance to fuel up both our cars and our stomachs for the morning .

Hope to see you all there.

Tim - white liberty RS Wagon

StreetFame33

This cruise will be tomorrow, Saturday the 25th. We're expecting about 50 odd cars at the first meet at Wow Sight and Sound. Please make sure you bring your own food on the day, some suggestions were to bring somethings for a BBQ or even some Sandwitches.

We will be connected to UHF Channel 1 for the day so those who have them please bring them along. Tory in the White Supercharged Corolla will be at the back of the cruise to ensure every arrives safely and I'll be a Midnight Purple R33 with the plates MRR33 leading the cruise.

I think another member will be bring drinks on the day they will be $1 each for a cold can.

For those who haven't got there GoVia tag, you can either buy them at some Service Stations, or jumping onto GoVia.com.au. If you don't have your tag on the day you will need to pay your toll within 3 days, so don't worry you can still come!

Everyone please behave on the cruise, this is no race and we're looking to have a good day out without any idiots on the road, I'll keep it simple - if you're tempted to be a idiot don't come and if you are I will shame you on the Forums.

I hope I've coverd the important things and it should be an awesome day out see you tomorrow guys and girls!

StreetFame33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...