Jump to content
SAU Community

Recommended Posts

As has been spoken of many times before, I think it is time to organise a proper day out at Mallala.

My suggestion is to go out Saturday November 15th. This is a public 'practice day' and there is 1 x 15 minute session for each vehicle class from 10am - 5pm. So you'd get to go out roughly 7 times for 10 or so laps. (And 15 minutes at a time is the most you'd want to be out there in one stretch). Cost is $70 each car (I believe nothing for spectators) and we can just rock up. I have chosen this date because it is unlikely to be rainy, and unlikely to be too hot. I have emailed Christine Kemp and she said no probs - we just have to have a full licence (no P or L plates), helmet and long sleeves. Pay the cash, sign the indemnity and we're off. No minimum numbers required.

Perhaps we could organise a bbq (hint hint Steve & Timmay) and make a decent day of it. It could of course include an after cruise and whatever anyone suggests. I know we have access to some G-Techs for measurement purposes too and we could have a little in-house competition.

What do you all think?

Link to comment
https://www.sau.com.au/forums/topic/28055-mallala/
Share on other sites

Bring it on Andrew!! I've been hanging out for this day, I spoke to the "other" guys about this and they were keen as too.

My only concern was cooking my engine but apparently I've got nothing to worry about (to an extent).

BBQ is an awesome idea, maybe we could use everyones brakepads after a few laps!! :):D

Link to comment
https://www.sau.com.au/forums/topic/28055-mallala/#findComment-584174
Share on other sites

Nightcrawler, I've always want to do this.

It would be great fun getting everyone to come out.

I better hurry with my car mods.

It's might be a little bit rush but, my car may not be complete yet.

I betta hurry up...nothing like a little extra peers pressures

Bring it on, bring it on :P

Link to comment
https://www.sau.com.au/forums/topic/28055-mallala/#findComment-584348
Share on other sites

maybe we'll have to push it back a couple of weeks. The last 3 practice days for the year are:

Saturday 29th November

Saturday 6th December

Saturday 13th December

but the longer we leave it, the greater chance of hot weather. If it's much over 30 degrees there is no way I am gonna race my car .... David had his R33 out there last year when it was about 25 degrees and it was boiling over the coolant (out of the overflow bottle) every time he stopped unless he warmed it down for 10+ minutes.

But I'm open to suggestions .....

[edit - damn I can't change the poll]

Link to comment
https://www.sau.com.au/forums/topic/28055-mallala/#findComment-584365
Share on other sites

New the 540s in 16'' is $230, if you find the right people who race saloon cars and the like they will give away their old race tyres for next to nothing but like the ones MattR has they only have very minimal tread and are no longer as sticky as new ones, i scored a pair for nothing but when they have 30% tread and have not been used for a while they go off a bit.

Link to comment
https://www.sau.com.au/forums/topic/28055-mallala/#findComment-586141
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...